Bus Conversion Magazine Bulletin Board

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: rip on February 22, 2013, 05:09:11 AM

Title: Ramco mirrors
Post by: rip on February 22, 2013, 05:09:11 AM
When I did my conversion I found a used set of Ramco mirrors which looked good for about seven years.The mirrors now were really looking bad.The chrome was pitted and pealing off.I called Ramco and they do not refinish their mirrors.I found a company in Phx. that would re chrome them but the mirrors and wiring had to come off.I found the mirrors are held on using velcro which was a little tricky removing without breaking the mirrors.I finally got my mirrors back and on my bus and they really look good.If anyone whats to do this contact me and I walk you through the process.

Title: Re: Ramco mirrors
Post by: wg4t50 on February 22, 2013, 05:42:03 AM
Sounds like a plan, also some folks prefer sandling down and doing the Powder Coat in what ever color they like.
ALways choices, Me I like the origional Chrome.
Dave M