Bus Conversions dot Com Bulletin Board
March 03, 2015, 12:20:27 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an Online Subscription: You will not have to go out in the rain, sleet, hail, or snow to retrieve it.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: Need help with bus  (Read 1217 times)
heintzbus
Newbie
*
Offline Offline

Posts: 3




Ignore
« on: June 22, 2006, 02:05:51 PM »

       I cannot find the Voltage Regulator on my1981 MCI9. I see F1 going to rear junction box terminal 48 and 49 then going to front of bus. Is mine missing or is it in a front compartment?
Logged
Beatenbo
Sr. Member
****
Offline Offline

Posts: 275


1993 MCI 102 C3 Cat Power


WWW

Ignore
« Reply #1 on: June 22, 2006, 06:02:01 PM »

I have owned 5 MCIs and every one I had including my 1980 MC-9 was in the back baggage bin right side on bulkhead. Unless a previous owner hid somewhere. Check rear engine compartment left rear and see if moved close to that junction box. Good luck. Charlie B.
Logged
Busted Knuckle
Hero Member
*****
Offline Offline

Posts: 6447


6 Setras, 2 MCIs, and 1 Dina. Just buses ;D


WWW

Ignore
« Reply #2 on: June 22, 2006, 06:05:21 PM »

I've always found them in the right rear bay also! BK
 Grin
Logged

Busted Knuckle aka Bryce Gaston
KY Lakeside Travel's Busted Knuckle Garage
Huntingdon, TN 12 minutes N of I-40 @ exit 108
www.kylakesidetravel.net

Grin Keep SMILING it makes people wonder what yer up to! Grin (at least thats what momma always told me! Grin)
mak
Full Member
***
Offline Offline

Posts: 158

Southern California location


WWW

Ignore
« Reply #3 on: June 22, 2006, 07:14:20 PM »

Yes, MCI  9 bus regualtor in last bay blukhead wall passenger side behing a metal protective box. If your just setting the volage, you can do so without re-moving the box, just place a very small sloted screwdriver in the hole and turn a little. If the regulatory is not working. you can just replace the circut board for around $75 and 4 screws. easy to do.
Logged

I may have started it, but you'll have to finish it!
Located in So CA (Orange County)
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!