Bus Conversion Magazine Bulletin Board
November 22, 2017, 06:53:27 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an Online Subscription: By clicking on any ad, a hotlink takes you directly to the advertiser’s website.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: 1 [2]  All   Go Down
Author Topic: EHP roll board???  (Read 6579 times)

« Reply #15 on: November 16, 2008, 03:22:43 PM »

Reflectix is rated differently for different applications.



and using the application for a metal building, (which probably approximates a bus), and considering I only have a 1/4" dead air space, I figure as a WAG that the R value is probably around 1. However it also works as a reflective barrier system which also helps.
However... I don't really believe all the hype that I've seen from these kinds of companies. I saw a few that touted the R value as "Up tp r-25" for foil-bubble-foil.
Reflectix is available at Lowe's and Home Depot and many other home centers.

The blue foam is available from Lowe,s and other places. It is a Dow Building systems product with an R-3 rating per 1/2"


I cut the foam to fit between the ribs, using 3 layers. I also filled all the cracks and seams with canned spray foam insulation. The foil goes over the ribs, (which I covered with felt as a conduction barrier), and the edges of the foil are sealed together with aluminum foil HVAC tape.

Hopefully all of this gives me at least an honest R-9 rating. It seems to help quite a bit anyway.. we can heat the bus with 2 1500 watt space heaters and be in shirt sleeves down to about 20° if the wind isn't blowing and the nose isn't faced into the wind.. that part isn't done yet.
In the summer time, if we are in the shade, our two window A/C,s keep it comfortable inside up to about 95°. If we had roof air or mini splits, I don't think we'd have a problem cooling at over 100°

Pages: 1 [2]  All   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!