Bus Conversion Magazine Bulletin Board
February 19, 2018, 04:08:55 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an Online Subscription: You will not have to go out in the rain, sleet, hail, or snow to retrieve it.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
Author Topic: Allison HT746 Temp Sender  (Read 1608 times)
Jr. Member
Offline Offline

Posts: 85

« on: June 26, 2006, 05:29:09 AM »

I have an HT746 and I am trying to locate a new temp sender. Previous owners must have removed the sender because I traced a dangling wire near the trans to the guage up front. Question is : Is the correct port to install the sender on the lower right(laying under trans facing engine)? I have what looks like a 1/4" NPT bolt there. It is standard Eagle VDO guages in front. Thanks

1991 Eagle 15
Hero Member
Offline Offline

Posts: 523

« Reply #1 on: June 28, 2006, 01:48:39 PM »

Temp sensor for ATEC is part of internal valve body harness.
Temp sensor for dash guage is usually tapped into a trans cooler port.
Sammy  Cool
Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!