Bus Conversions dot Com Bulletin Board
September 02, 2014, 12:15:31 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If your computer is lost, damaged, or stolen, we will replace all of your E-Mags for free.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1] 2  All   Go Down
  Print  
Author Topic: weight Question  (Read 2708 times)
JackConrad
Orange Blossom Special II
Global Moderator
Hero Member
*****
Offline Offline

Posts: 4447


73' MC-8 8V71/HT740 Southwest Florida


WWW
« on: January 09, 2009, 08:20:41 AM »

    I am getting ready to swap 8V71 engines in our MC-8. I have a dolly for removing the engine/transmission from our bus that a friend is loaning me. I will need to separate the engine & transmission and connect the transmisssion to the new engine. I plan to use 2 engine hoist to accomplish this, using 1 to stabilize the transmission and the other to lift the engine off the dolly and set the other one in place. Can anyone tell me the weights of the 8V71 and the Allison 740 transmission?  Thank in advance.  Jack
« Last Edit: January 09, 2009, 08:44:17 AM by JackConrad » Logged

Growing Older Is Mandatory, Growing Up Is Optional
Arcadia, Florida, When we are home
http://s682.photobucket.com/albums/vv186/OBS-JC/
Sojourner
Jesus Love You!
Hero Member
*****
Offline Offline

Posts: 894


WWW

Ignore
« Reply #1 on: January 09, 2009, 08:30:40 AM »

2310 lbs for 8v71n
Diesel Engine Specifications

Automatic Models HT 740

FWIW

Sojourn for Christ, Gerald
« Last Edit: January 09, 2009, 08:37:52 AM by Sojourner » Logged

http://dalesdesigns.net/names.htm
Ps 28 Blessed be the LORD, because he hath heard the voice of my supplications. The LORD is my strength and my shield; my heart trusted in him, and I am helped: therefore my heart greatly rejoiceth; and with my song will I praise him
luvrbus
Guest

« Reply #2 on: January 09, 2009, 08:33:24 AM »

Jack, 2395 wet for the 8v71 and 840 lbs for the 740 dry   good luck
Logged
luvrbus
Guest

« Reply #3 on: January 09, 2009, 08:38:12 AM »

Gerald, that page is not correct it has a 8v71 weighing more than a 8v92 fwiw
Logged
Sojourner
Jesus Love You!
Hero Member
*****
Offline Offline

Posts: 894


WWW

Ignore
« Reply #4 on: January 09, 2009, 08:46:05 AM »

2310 lbs for 8v71n
Diesel Engine Specifications

Automatic Models HT 740

Both are with the dip stick...LOL

FWIW

Sojourn for Christ, Gerald
Logged

http://dalesdesigns.net/names.htm
Ps 28 Blessed be the LORD, because he hath heard the voice of my supplications. The LORD is my strength and my shield; my heart trusted in him, and I am helped: therefore my heart greatly rejoiceth; and with my song will I praise him
kyle4501
Hero Member
*****
Offline Offline

Posts: 3122


PD4501 South Carolina




Ignore
« Reply #5 on: January 09, 2009, 08:55:49 AM »

Don't neglect the additional weight of the various accessories.

I put a complete 8V71 on my trailer (has 2 3500# axles) & it took most of the suspension travel out . . .

I'd plan on at least 4000#. You don't need the added excitement of figuring out how to pick it up after the lift fails . . . .  Wink
Logged

I know you believe you understand what you think I said, but I am not sure you realize that what you heard is not what I meant. (R.M. Nixon)
Lin
Hero Member
*****
Offline Offline

Posts: 4545

1965 MC-5a




Ignore
« Reply #6 on: January 09, 2009, 09:04:06 AM »

I like what Kyle says.  This is not something that I would do, but if I did I would be looking for a serious safety factor.
Logged

You don't have to believe everything you think.
Brian Diehl
Hero Member
*****
Offline Offline

Posts: 982




Ignore
« Reply #7 on: January 09, 2009, 04:48:07 PM »

Jack, I used my 2 ton hoist to lift my ht754 with no problem.  the ht754 is heavier than the 740 by about 100 lbs.

I also picked up my 6v92 without issues as well.    (see my webpage for pictures of what I did with my engine replacement project)

You will have no problems as long as you go slow, connect you chains very well and always make sure you ask yourself the "what if" questions.

Why are you swapping 8v71s?
Logged
Utahclaimjumper
Hero Member
*****
Offline Offline

Posts: 837




Ignore
« Reply #8 on: January 09, 2009, 05:54:09 PM »

My 8V71 with all accessories and a VS2-8 trans weighed 3600Lbs.>>>Dan
Logged

Utahclaimjumper 
 EX 4106 (presently SOB)
Cedar City, Ut.
 72 VW Baja towed
chris4905
Full Member
***
Offline Offline

Posts: 148




Ignore
« Reply #9 on: January 09, 2009, 10:54:37 PM »

Jack,

I have done this.  Took the 8V71 & Spicer out of the back of my 4905.  Had a 6V92 ready to put in. 

I removed everything I could from the back end providing good access to the engine, then rented a forklift for a few hours.  Cost me less then a hundred bucks.  I'm glad I did, as the "nervous factor" climbs rapidly when you start to take the engine out.

I used my tractor bucket to take the Spicer 4 speed off the old 8V71 when it was out in the open.  Then I used a 2 ton engine hoist to lift the V730 onto the 6V92 once I got the 6V92 into the bus.  Again I rented the folk lift when ready to put the 6V92 into place.

I know your a little different, you may have to have the transmission attached and put them in together.  I still vote for the forklift.

I used a pallet jack ($200) from Harbor Freight to move the engines around the shop.

Good luck, and be careful.

Chris
Logged

Chris & Cheryl Christensen
Ex-Bus Owners
Eagle, Idaho
luvrbus
Guest

« Reply #10 on: January 10, 2009, 04:58:25 AM »

Jack, if the dolly is made like the one in the MCI manual it will be stable,just remove the transmission from the engine with it still on the dolly it makes a good workbench no bending over to remove the flex plate bolts from inside the little round hole above the starter. good luck
Logged
JackConrad
Orange Blossom Special II
Global Moderator
Hero Member
*****
Offline Offline

Posts: 4447


73' MC-8 8V71/HT740 Southwest Florida


WWW
« Reply #11 on: January 10, 2009, 05:53:09 AM »

     I plan to use a 2 ton engine hoist and remove Alternator from engine before lifting it from the dolly.  We are changing engines because our 8V71 is getting tired. We had no records on this engine when we purchased the bus. We found another 8V71 with documented 42,000 miles since complete out of frame overhaul. This engine is complete with starter, PS pump, air compressor, cooler, air throttle, etc. It also is set up as 304/318 HP with Jake brakes.
    I know most are changing to 4 cycle computer controlled engines, but for the amount of miles we put on the bus this will work for us.  Installing any other engine would involve fabricating parts for intake and exhaust systems or looking for new/used parts. I don't feel I can install any other engine for what I will have in this one when all the littles extras are added into the final cost.  Jack
Logged

Growing Older Is Mandatory, Growing Up Is Optional
Arcadia, Florida, When we are home
http://s682.photobucket.com/albums/vv186/OBS-JC/
Brian Diehl
Hero Member
*****
Offline Offline

Posts: 982




Ignore
« Reply #12 on: January 10, 2009, 05:56:06 AM »

Jack,

You are going to love the jake brakes!

Sounds like you have a good plan.  Please keep us up to date on your progress.  You might consider replacing your coolant hoses, powersteering hoses, and fuel lines at the same time....
Logged
Dreamscape
Dreamscape
Global Moderator
Hero Member
*****
Offline Offline

Posts: 3295


1968 Silver Eagle Model 01 8V71 Allison 740 #7443


WWW
« Reply #13 on: January 10, 2009, 05:59:06 AM »

Jack,

Is your new 8v71 a T or an N? Just curious.

Paul
Logged

Becky and Paul Lawry, On The Road
Travel Blog - http://dreamscapetravels.wordpress.com/
Bus Blog - http://dreamscapesilvereagle.wordpress.com/
______________________________________________________

Our coach was originally owned by the Dixie Echoes.
JackConrad
Orange Blossom Special II
Global Moderator
Hero Member
*****
Offline Offline

Posts: 4447


73' MC-8 8V71/HT740 Southwest Florida


WWW
« Reply #14 on: January 10, 2009, 06:19:10 AM »

Jack,
Is your new 8v71 a T or an N? Just curious.
Paul

It is a N.     I will take a bunch of photos of the swap process.  Maybe it will end up being an article in Bus Conversions Magazine.  Jack
Logged

Growing Older Is Mandatory, Growing Up Is Optional
Arcadia, Florida, When we are home
http://s682.photobucket.com/albums/vv186/OBS-JC/
Pages: [1] 2  All   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!