Bus Conversion Magazine Bulletin Board
June 22, 2018, 12:45:05 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an Online Subscription: You can zoom in to make the text larger and easier to read.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
Author Topic: Info  (Read 2937 times)
Offline Offline

Posts: 47

« on: April 08, 2006, 11:04:40 PM »

Does anyone know of wireless system that I can install on the my DD engine and have the read out from the drivers seat. Such as Temp, oil pressure, Ect? Thanks in advance.

Hero Member
Offline Offline

Posts: 2199

Jim Shepherd


« Reply #1 on: April 09, 2006, 07:04:05 AM »

If your engine is DDEC, the best option (and most fun!!) is an electronic dash from Silverleaf (http://www.simply-smarter.com).  I use the VMSpc which is free software for a laptop I place on my passenger side dash.  You need to buy their "magic box" for about 4$400.  You can also use a DD Pro Driver or use a Pro-Link.  All of these connect to the data port in the driver area.

If you have a mechanical engine (pre-DDEC), you are stuck with running wires to the sensors.

Jim Shepherd
Evergreen, CO
85 Eagle 10/Series 60/Eaton AutoShift 10 speed transmission
Somewhere between a tin tent and a finished product
Bus Project details: http://beltguy.com/Bus_Project/busproject.htm
Blog:  http://rvsafetyman.blogspot.com/
Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!