Bus Conversion Magazine Bulletin Board
June 18, 2018, 02:58:17 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: New ownership began September 1st 2012!  Please send any comments to info@busconversions.com
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: 1 2 [3]  All   Go Down
Author Topic: ding  (Read 7886 times)
Sr. Member
Offline Offline

Posts: 402

Mikes Metal Mistress

« Reply #30 on: March 16, 2009, 05:03:57 PM »

Hello:    check with airgas & fabricator.com (any gas supplier will do)   to see what gas works with what metals.  They Do give a shield gas for SS to Carbon steel.   Argon with 25 to 35 % He with 1 or 2 % co2.   
    You can find all sorts of tips on the web.
       One welder said he uses 75/25 gas  argon co2 but he limits his SS welding to 1 pass to hold down excess heat build up. 
     My solution for the rusting problem when welding with a mig is to make sure that you bury the carbon welds with SS weld but there again  the gas may be an issue..
    Anyway lots of info out there to get the job done.
    Regards and Happy bussin   mike

Mike Lutestanski   Dunnellon Florida
  1972 MCI 7
  L10 Cummins  B400R  4.625R
Pages: 1 2 [3]  All   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!