Bus Conversions dot Com Bulletin Board
November 25, 2015, 02:24:41 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If your computer is lost, damaged, or stolen, your Online mags will be safe.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: 1 [2]  All   Go Down
Author Topic: Air Beam Leak Repair  (Read 5577 times)

« Reply #15 on: April 16, 2006, 11:33:57 AM »

You'll get a better appreciation of the task if you go to Gumpydog's site and look at the pictures.  The airbeams are rectangular tubes about 6x6 or 6x8 and 36-40" long  buried in the frame structure  below the floor and inside the wheels.

It can be done - anything can if you're determined enough!  but it's alot of work.   My "California" MCI-9 had a huge amount of fine silt all over this area that served as a "sponge"  making sure the corrosion continued long after the rain was gone.  Haven't "tested" for leaks yet,  but I'll let you know if any show and what I do to address the problem.
Hero Member
Offline Offline

Posts: 1115

MC8 under construction

« Reply #16 on: April 16, 2006, 06:06:24 PM »

Like the old expression goes

Given enough time and enough money you can fix anything

Not to say it is always worth it


If it won't go FORCE it ---- if it breaks it needed to be replaced anyway
Albuquerque, NM   MC8 L10 Cummins ZF
Pages: 1 [2]  All   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!