Bus Conversions dot Com Bulletin Board
October 31, 2014, 12:27:56 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an Online Subscription: You will not have to go out in the rain, sleet, hail, or snow to retrieve it.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: DDEC Fuse  (Read 1102 times)
homermandy
Jr. Member
**
Offline Offline

Posts: 85




Ignore
« on: July 07, 2006, 06:27:44 PM »

I was checking my fuse from the battery to the DDEC and ATEC. It looked pretty rusty. I went to take off the screws at the fuse and it literally crushed in my hand. Now, what size fuse was it:)? Amperage wise. I need to get one in the morning. Any special kind? I assume a normal fuse will work. Thanks

PS. This also may be my intermittant trans do not shift issue. Will keep you posted.
Logged

1991 Eagle 15
homermandy
Jr. Member
**
Offline Offline

Posts: 85




Ignore
« Reply #1 on: July 07, 2006, 06:34:22 PM »

I checked online at some schematics and it looks like it might be a 15A fuse?
Logged

1991 Eagle 15
RTS/Daytona
Hero Member
*****
Offline Offline

Posts: 526


Pete RTS/Daytona ->'89 TMC 35' 102" 6V92TA 4:10


WWW

Ignore
« Reply #2 on: July 07, 2006, 06:45:39 PM »

ECM Power connector pins F/E (circuit 240) to one 20 amp fuse
ECM Power Connector pins A/B (circuit 241) to one 20 amp fuse

Pete RTS/Daytona
Logged

If you ain't part of the solution, then you're part of the problem.
homermandy
Jr. Member
**
Offline Offline

Posts: 85




Ignore
« Reply #3 on: July 07, 2006, 07:33:33 PM »

Thanks Pete. Interesting, it looks like 2 wires were connected to a single 20A fuse then. Unless I am missing a feed from the batteries. Thanks
Logged

1991 Eagle 15
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!