Bus Conversions dot Com Bulletin Board
October 22, 2014, 08:55:51 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an Online Subscription: It will not turn yellow, get musty, dusty, and mildewed or fade.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: DDEC Fuse  (Read 1082 times)
homermandy
Jr. Member
**
Offline Offline

Posts: 85




Ignore
« on: July 07, 2006, 06:27:44 PM »

I was checking my fuse from the battery to the DDEC and ATEC. It looked pretty rusty. I went to take off the screws at the fuse and it literally crushed in my hand. Now, what size fuse was it:)? Amperage wise. I need to get one in the morning. Any special kind? I assume a normal fuse will work. Thanks

PS. This also may be my intermittant trans do not shift issue. Will keep you posted.
Logged

1991 Eagle 15
homermandy
Jr. Member
**
Offline Offline

Posts: 85




Ignore
« Reply #1 on: July 07, 2006, 06:34:22 PM »

I checked online at some schematics and it looks like it might be a 15A fuse?
Logged

1991 Eagle 15
RTS/Daytona
Hero Member
*****
Offline Offline

Posts: 526


Pete RTS/Daytona ->'89 TMC 35' 102" 6V92TA 4:10


WWW

Ignore
« Reply #2 on: July 07, 2006, 06:45:39 PM »

ECM Power connector pins F/E (circuit 240) to one 20 amp fuse
ECM Power Connector pins A/B (circuit 241) to one 20 amp fuse

Pete RTS/Daytona
Logged

If you ain't part of the solution, then you're part of the problem.
homermandy
Jr. Member
**
Offline Offline

Posts: 85




Ignore
« Reply #3 on: July 07, 2006, 07:33:33 PM »

Thanks Pete. Interesting, it looks like 2 wires were connected to a single 20A fuse then. Unless I am missing a feed from the batteries. Thanks
Logged

1991 Eagle 15
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!