Bus Conversions dot Com Bulletin Board
September 02, 2014, 07:50:03 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an E-Mag Subscription: It will not be stolen by your mailman or your neighbor who also may be into buses.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1] 2  All   Go Down
  Print  
Author Topic: The Big Move-Scenicrusier- now completed  (Read 3461 times)
Michael_e
Jr. Member
**
Offline Offline

Posts: 63




Ignore
« on: July 01, 2009, 12:39:58 PM »

The subject line sums it up fairly well. I've pretty much ran out of time and am going to have it moved via Landoll. I have got almost all the air leaks fixed, but only get about 95lbs pressure on the gauge. Now, with NO air in the system i can jack up the front wheels on at a time and spin them. So the brakes are not locked on the front. On the rear, i can jack up each wheel one at a time and spin that wheel. So i guess i don't have to worry about the brakes being locked, right?? BTW, the trans is an automatic and still in neutral. Or, when i apply air to the system, will it lock up the brakes until it reaches a certain level. And the bus is a 1955 Scenicrusier. If the brakes do lock up, is it just the rear most axle with the parking brake?? I'm working by myself here and can't hit the brakes and run back to see if anything is moving.
I really appreciate you guys help with this.   Mike
« Last Edit: July 20, 2009, 03:34:45 PM by Michael_e » Logged

1955 GM Scenicrusier, 8V92TA & Allison 754. Totally rewiring all 12v systems and lots of questions.
fe2_o3
Hero Member
*****
Offline Offline

Posts: 569





Ignore
« Reply #1 on: July 01, 2009, 01:45:02 PM »

Have you got Da Book? Might come in handy.  Is the maxi on? When you air up to 95lb can you release the maxi.
If so will it move then? Where are you? Might be some one close to help, or at least kibitz....Cable
Logged

Sofar Sogood
1953-4104
KB7LJR
Everett, WA.
NewbeeMC9
NewbeeMC9
Hero Member
*****
Offline Offline

Posts: 1164


1981 MC9 8V71, HT 740




Ignore
« Reply #2 on: July 01, 2009, 04:31:40 PM »

You should be ok with the Allison auto in neutral to get it on the landoll.  if you have to tow it very far then the you should pull the drive axles.
Logged

It's all fun and games til someone gets hurt. Wink
Len Silva
Hero Member
*****
Offline Offline

Posts: 4084


Angle Parked in a Parallel Universe


WWW

Ignore
« Reply #3 on: July 02, 2009, 06:47:30 AM »

It sounds like you do not have spring brakes and that the ICC valve is on.  That would apply the rear brakes as the pressure comes up.
Logged


Hand Made Gifts

Ignorance is only bliss to the ignorant.
Michael_e
Jr. Member
**
Offline Offline

Posts: 63




Ignore
« Reply #4 on: July 13, 2009, 11:55:41 AM »

Well, things are really getting close now. Towing company is set to be here bright and early tomorrow. Got everything checked as much as i can. Brakes are released and air system will air up in 10 min or slightly less. Have a couple manual releases to get all air out once up on Landoll trailer. Will be heading East out of Denver tomorrow morning on I-70 to at least Cobly, Ks. Then we might be going the rest of the way East on Hwy24. If you just happen to see us, take a pic and post it to this thread and let us know where you were when you saw us. I'm sure there will be more to come. Thanks,
Mike
Logged

1955 GM Scenicrusier, 8V92TA & Allison 754. Totally rewiring all 12v systems and lots of questions.
kyle4501
Hero Member
*****
Offline Offline

Posts: 3122


PD4501 South Carolina




Ignore
« Reply #5 on: July 13, 2009, 12:20:47 PM »

The winch on the landoll will drag your bus on the deck even with the rear brakes on.  Shocked But it sounds as tho you'll have no worries with the brakes.

With nothing on the roof & the air bags flat, the total height of your bus sitting on a landoll will be right at 13'6", so no worries there.

CHECK your window gaskets! I lost a tear drop window & Aaron lost a D window.

BTW, while Da Book is full of good information, it is merely a reference only since these buses have often been heavily modified in their past . . . .
None of mine have the DD3 park brakes, most have the maxi's



Good luck with the move & I hope your ole girl enjoys the ride!
Logged

I know you believe you understand what you think I said, but I am not sure you realize that what you heard is not what I meant. (R.M. Nixon)
Michael_e
Jr. Member
**
Offline Offline

Posts: 63




Ignore
« Reply #6 on: July 13, 2009, 02:03:56 PM »

Thanks for the tips there Kyle. I got some of those ratchet style tiedowns and wapped around the bus across the baggage bay doors. The rubber hinges on a couple are looking quite old. And i was just getting ready to duct take the teardrop windows and a really nice?? thunderstorm just came up and now everything is soaked. Got some small hail also. It really came up fast. Everything else should be ready for this adventure, i know i am. Maybe if we get the bus out from infront of the house, the house might sell quicker?? ya think?? LOL!! Probably should get the refridgerator off the porch too.

Mike
Logged

1955 GM Scenicrusier, 8V92TA & Allison 754. Totally rewiring all 12v systems and lots of questions.
jackhartjr
Hero Member
*****
Offline Offline

Posts: 1326


Beauty is in the eye of the beholder!




Ignore
« Reply #7 on: July 13, 2009, 02:08:56 PM »

Mike, I took my teardrops out so I would not have to worry about them!
You know they are made of 'unobtainium!'
Good luck with the move buddy, take lots of photos, I regret not taking more than I did.
Better yet, give your wife or kid or SOMEBODY the camera and tell them to shoot away!
Jack
Logged

Jack Hart, CDS
1956 GMC PD-4501 #945 (The Mighty SCENICRUISER!)
8V71 Detroit
4 speed Spicer Trannsmission
Hickory, NC, (Where a call to God is a local call!)
Michael_e
Jr. Member
**
Offline Offline

Posts: 63




Ignore
« Reply #8 on: July 19, 2009, 09:43:41 AM »

Tuesday finally got here and man-o-man was i excited. I would have liked to gotten more pictures but i was involved in the moving process. I had to steer the bus up on the trailer as it was being winched.
First pic is of my bus just waiting for the big trailer to arrive.
Second pic is up on the trailer
« Last Edit: July 19, 2009, 09:46:27 AM by Michael_e » Logged

1955 GM Scenicrusier, 8V92TA & Allison 754. Totally rewiring all 12v systems and lots of questions.
Michael_e
Jr. Member
**
Offline Offline

Posts: 63




Ignore
« Reply #9 on: July 19, 2009, 09:47:29 AM »

Third pic is starting to roll out down the driveway
Fourth is finally off our property and headed down our road to begin the 450 mile adventure.
« Last Edit: July 19, 2009, 09:49:04 AM by Michael_e » Logged

1955 GM Scenicrusier, 8V92TA & Allison 754. Totally rewiring all 12v systems and lots of questions.
Michael_e
Jr. Member
**
Offline Offline

Posts: 63




Ignore
« Reply #10 on: July 19, 2009, 10:12:36 AM »

I stood there for a few minutes just soaking up what had happened. Then had to get busy putting away the portable air compresser and ladder and a few other tools. Checked the house over, locked up, and finally got myself on the road pulling my own 16 foot flatbed trailer loaded up with an assortment of personal items. Should have gotten a picture of that but my mind was overloaded with what had just happened.
I took a slightly different route to get to I-70 than the towing company and i don't think i was going as fast as they were. My poor old pickup has 160K plus miles on it so i take it a little easy. So i'm headed east on I-70 and watching every off/on ramp just to make sure there have not been any problems. I especially watch the two big rig weigh stations, one at Limon, Co, and the other just as you cross into Kansas, to make sure my Scenicrusier hasn't been detained. No problems there. I get to Colby, Ks, get off I-70 and continue east on Hwy 24. Hwy 24 is a bit lesser traveled that that I-70, but it is a very good road in great condition with plenty of room to pull off in most places if needed. It really don't matter what road you travel in the western half of Kansas, not much to really look at out there. Ya kinda gots to like wheat and corn.
So, i'm still just motoring along and get to thinking, maybe i should check the cell phone. I pull into Hill City, Ks, and get off the road and flip that thing open and find that there is a message waiting. It turns out that the driver, Jason, said that he blew out one of the trailer tires right at Goodland, Ks and was in a shop getting it replaced. No dammage to anything and he said he should be on the road in about an hour. So, even at my somewhat slower pace, i managed to get ahead of him. So, i continue on and get into Beloit, Ks. our destination and head down to my shop. YIKES, it was 104 degrees and about 70-75 percent humidity. I was sweating like crazzy just trying to breath, let along doing any closely related to work. You couldn't lay your hand on anything metal with out gloves on or you would get burnt. I get the garage open and my trailer backed inside, unhooked, and the pickup out of the way. Set out a folding lawn chair inside the garage door and try and relax. About 30 minutes later, here came Jason with my baby. I only got a couple of pictures of the unloading due to having to help re air up my bus and watch that nothing got scraped off the bottom when unloading, plus it was just so dang hot i could barely function.  
Logged

1955 GM Scenicrusier, 8V92TA & Allison 754. Totally rewiring all 12v systems and lots of questions.
Michael_e
Jr. Member
**
Offline Offline

Posts: 63




Ignore
« Reply #11 on: July 19, 2009, 10:19:25 AM »

So, there you go. The big day came and went without any real drama. Everything made the trip with out any incident. All the glass survived just fine. I bet i was in bed and asleep by 8pm. Boy - was i tired.
Next day i had quite a few of the locals stop by and talk about the Scenicrusier and the different times when they were younger having taking trips on a bus like that. Now, hopefully we can get that house sold in Denver and open a new chapter in our lives in a small town in Kansas with our Scenicrusier.
Logged

1955 GM Scenicrusier, 8V92TA & Allison 754. Totally rewiring all 12v systems and lots of questions.
cody
Guest

« Reply #12 on: July 19, 2009, 10:42:00 AM »

Its a beauty michael.
Logged
jackhartjr
Hero Member
*****
Offline Offline

Posts: 1326


Beauty is in the eye of the beholder!




Ignore
« Reply #13 on: July 19, 2009, 10:53:19 AM »

Congreat buddy!
Wish they were all that smooth!
Now let the fun begin!
JAck
Logged

Jack Hart, CDS
1956 GMC PD-4501 #945 (The Mighty SCENICRUISER!)
8V71 Detroit
4 speed Spicer Trannsmission
Hickory, NC, (Where a call to God is a local call!)
wildbob24
Hero Member
*****
Offline Offline

Posts: 531





Ignore
« Reply #14 on: July 19, 2009, 11:16:54 AM »

Congrats on a successful move.

The old girl looks like she's in pretty good shape. Should be fun bringing her back to life.

Bob
Logged

P8M4905A-1308, 8V71 w/V730
Custom Coach Conversion
Duluth, GA
Pages: [1] 2  All   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!