Bus Conversions dot Com Bulletin Board
December 20, 2014, 05:37:36 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an Online Subscription: It will not get torn up or crushed if you back over it with your bus.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: Trying to Locate Williams Controls Treadle Assemble (Accelerator Pedal Pad)  (Read 1000 times)
Depewtee
Full Member
***
Offline Offline

Posts: 214





Ignore
« on: August 01, 2009, 06:44:49 PM »

Hi All!

I have been playing with my new-to-me bus all weekend and found there are some items I would like to replace.  The driver's area of my bus is in great shape, but the rubber pad on the accelerator pad is worn.  I did an Internet search and found the manufacturer is Williams Controls and the part number is 11875.  The part is described on the Williams Control website as a "treadle assembly."  I would think this would be a common replacement part as many buses I have seen have similar wear on the accelerator pedal.  Anybody know where I can find a new one of these?

Thanks in advance,
Brian
Logged

Brian Shonk
Fort Walton Beach, FL (Florida Panhandle)
1981 Prevost LeMirage Liberty Coach
1984 TMC MC-9
Melbo
Hero Member
*****
Offline Offline

Posts: 1076


MC8 under construction




Ignore
« Reply #1 on: August 01, 2009, 07:07:32 PM »

Use anything to recover the pedal

There is the assembly on ebay for about 50 bucks if I remember correctly

Melbo
Logged

If it won't go FORCE it ---- if it breaks it needed to be replaced anyway
Albuquerque, NM   MC8 L10 Cummins ZF
dave870
Newbie
*
Offline Offline

Posts: 19




Ignore
« Reply #2 on: August 01, 2009, 07:25:50 PM »

Don't know what bus you have but many of the Williams valves use the same treadle.

This link to Muncie/Baker  Parts is PDF catalog for Flxible 870

Part # 97 2387 152 at $22.62 is very likely the correct part.  Muncie simply describe as "Cover." Whenever I've called Muncie they are great if you have a part number. Not much help without.


Dave.


http://www.abc-companies.com/muncie_baker/parts.asp
Logged
luvrbus
Hero Member
*****
Offline Offline

Posts: 13126




Ignore
« Reply #3 on: August 01, 2009, 07:40:55 PM »

I bought the cover for a Williams from http://www.utxchange.com    good luck
« Last Edit: August 01, 2009, 07:53:10 PM by luvrbus » Logged

Life is short drink the good wine first
SmoothJazz
Jr. Member
**
Offline Offline

Posts: 78




Ignore
« Reply #4 on: August 02, 2009, 01:31:37 PM »

Try Brake Systems, Inc. in Portland Oregon who is a Williams Controls Distributor. They have a very large inventory and were always very helpful. They can be reached at 503-236-2116.
Logged
buswarrior
Hero Member
*****
Offline Offline

Posts: 3571


'75 MC8 8V71 HT740




Ignore
« Reply #5 on: August 02, 2009, 04:16:35 PM »

A piece of ribbed flooring glued to the pedal was a common fix in fleet use.

happy coaching!
buswarrior
Logged

Frozen North, Greater Toronto Area
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!