Bus Conversions dot Com Bulletin Board
December 18, 2014, 07:52:34 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an Online Subscription: It will not get torn up or crushed if you back over it with your bus.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: Mci 9 bus door  (Read 1167 times)
jatnip
Newbie
*
Offline Offline

Posts: 47




Ignore
« on: July 12, 2006, 09:46:46 PM »

Hi
When you shut the door on my MCI 9 bus from the outside the inside door handle will not "cam over" lock.  From the inside it works great with the handle.  It acts like that an adjusting rod needs to be longer or shorter.  How is the correct way to adjust the door?

Thanks
Jim
Logged
JackConrad
Orange Blossom Special II
Global Moderator
Hero Member
*****
Offline Offline

Posts: 4447


73' MC-8 8V71/HT740 Southwest Florida


WWW
« Reply #1 on: July 13, 2006, 03:53:47 AM »

On top of the dash on the passenger side you should see a access panel that is held in place by a couple screws. Remove this panel and you will see a turnbuckle. That is the adjustment.  You may be able to remove the Drivers AC/heat air return panel on the face of the dash and look up under the dash to see the turnbuckle.  Hope this helps, Jack
Logged

Growing Older Is Mandatory, Growing Up Is Optional
Arcadia, Florida, When we are home
http://s682.photobucket.com/albums/vv186/OBS-JC/
LUKE at US COACH
Full Member
***
Offline Offline

Posts: 113




Ignore
« Reply #2 on: July 13, 2006, 03:23:33 PM »

HI Jim & Folks:

Good info. from Jack.  There is also a fat little spring under there that if disconnected or broken, will cause the same problem. We keep a box full of those springs on the shelves as we quite often change them out here in the shop or ship them to MCI coach owners.
I Hope this HELPS!!

Happy & SAFE!! Bussin' to All.

LUKE at US COACH
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!