Bus Conversions dot Com Bulletin Board
November 28, 2015, 02:57:49 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an Online Subscription: It will not get torn up or crushed if you back over it with your bus.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
Author Topic: Water Temperature gauge....  (Read 601 times)
Full Member
Offline Offline

Posts: 188

1979 MCI-9

« on: October 20, 2009, 12:20:01 AM »

I would like a recommendation on a water temp. gauge and sending unit to replace the one on
the dash of my MC9.    Is the original 24V.?     Existing wiring OK?
       Thanks, Iver.

Abbotsford, British Columbia, Canada
"Life may not be the party we hoped for,
But while we are here we might as well dance".
Bill B /bus
Sr. Member
Offline Offline

Posts: 274

« Reply #1 on: October 20, 2009, 05:20:16 AM »


MC9's are 24V.  Easy enough to verify the wiring with a continuity check.
Luke at US Coach will have the gauge and sender. Since there are several variations of senders and gauges tgis will get you a matched pair.


Bill & Lynn
MCI102A3, Series 50 w/HT70
Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!