Bus Conversions dot Com Bulletin Board
August 04, 2015, 08:43:29 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: This BB is intended for the sole purpose of sharing conversion and bus related information among visitors to our web site. These rules must be followed in order for us to continue this free exchange of info. No bad mouthing of any business or individual is permitted. Absolutely no items for sale are to be posted, except in the Spare Tire board. Interested in placing a classified or web ad, please contact our advertising dept. at 714-903-1784 or e-mail to: info@busconversions.com.

   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: Water Temperature gauge....  (Read 586 times)
Iver
Full Member
***
Offline Offline

Posts: 188


1979 MCI-9




Ignore
« on: October 20, 2009, 12:20:01 AM »

I would like a recommendation on a water temp. gauge and sending unit to replace the one on
the dash of my MC9.    Is the original 24V.?     Existing wiring OK?
       Thanks, Iver.
Logged

Abbotsford, British Columbia, Canada
"Life may not be the party we hoped for,
But while we are here we might as well dance".
Bill B /bus
Sr. Member
****
Offline Offline

Posts: 274





Ignore
« Reply #1 on: October 20, 2009, 05:20:16 AM »

Iver

MC9's are 24V.  Easy enough to verify the wiring with a continuity check.
Luke at US Coach will have the gauge and sender. Since there are several variations of senders and gauges tgis will get you a matched pair.

Bill
Logged

Bill & Lynn
MCI102A3, Series 50 w/HT70
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!