Bus Conversions dot Com Bulletin Board
August 29, 2014, 01:04:03 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an E-Mag Subscription: The dog will not eat it.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: Curious  (Read 891 times)
Bosshosssport96
Full Member
***
Offline Offline

Posts: 102




Ignore
« on: July 25, 2006, 09:13:31 PM »

A few days ago,I received my 8V92T,still bolted on was the clutch,pressure plate and throw out bearing,will these items work on a 8V71????Frank 4501-082
Logged
TomC
Hero Member
*****
Offline Offline

Posts: 6740





Ignore
« Reply #1 on: July 26, 2006, 09:58:43 AM »

I believe the bolt pattern is different.
Logged

Tom & Donna Christman. '77 AMGeneral 10240B; 8V-71TATAIC V730.
Happycampersrus
Full Member
***
Offline Offline

Posts: 120




Ignore
« Reply #2 on: July 26, 2006, 12:38:46 PM »

The flywheel end of the 8V92 crank is larger than the 8V71.  Undecided. The flywheels will NOT interchange. You can try and see if you can use the parts depending on which 8V71 flywheel you have. There are a couple different size clutches used and you might just have a match on the bolt pattern on the pressure plate.

Dale
« Last Edit: July 26, 2006, 12:47:33 PM by Happycampersrus » Logged
Bosshosssport96
Full Member
***
Offline Offline

Posts: 102




Ignore
« Reply #3 on: July 26, 2006, 06:19:40 PM »

Thanks for the responses.........Frank
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!