Bus Conversions dot Com Bulletin Board
December 19, 2014, 04:52:12 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an Online Subscription: It will not get torn up or crushed if you back over it with your bus.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: Any one have anything good or bad to say about this impact gun. SK-92141  (Read 1016 times)
zubzub
Hero Member
*****
Online Online

Posts: 1168


'53 4104. Roadworthy but rough around the edges.


WWW

Ignore
« on: February 06, 2010, 03:46:29 PM »

It's a 3/4" impact with 1200 ft/lbs of torque. 
http://www.skhandtool.com/Default.aspx?fusemode=10&pid=92141
Guy is selling it cheap ($150) a little worn but will do for me unless it has some kind of weakness I haven't been able to find online.  Basically I have a 1/2" with about 450 ft/lbs but need something a lot stronger for soem of the hard to reach palces and my 1" impact is a monster and basically a mistake at this point I will sell it once I get a decent 3/4".  So any info helpful.
Logged

Just Dallas
Bus Conversion Stuff on a Budget
Hero Member
*****
Offline Offline

Posts: 842



WWW

Ignore
« Reply #1 on: February 06, 2010, 04:45:17 PM »

Removed
« Last Edit: July 15, 2010, 12:54:57 PM by Now Just Dallas » Logged

I'm just an old chunk of coal... but I'm gonna be a diamond someday.
busnut104
Full Member
***
Offline Offline

Posts: 211




Ignore
« Reply #2 on: February 06, 2010, 05:30:15 PM »

I bought a I/R on e-bay I believe the # is 231 but not sure around 1200lb tork, around 100.00 bucks nice shape,  do not be in a hurry and watch e-bay.
Logged
zubzub
Hero Member
*****
Online Online

Posts: 1168


'53 4104. Roadworthy but rough around the edges.


WWW

Ignore
« Reply #3 on: February 07, 2010, 07:09:17 PM »

Looking for the big 1200 ft/lbs so 3/4"it is. No one have this gun? I figure it's probably good, I can handle the weight, would be surprised if my 1/2" weighed less.
Logged

wrench
Full Member
***
Offline Offline

Posts: 166





Ignore
« Reply #4 on: February 08, 2010, 04:53:47 AM »

It's a 3/4" impact with 1200 ft/lbs of torque. 
http://www.skhandtool.com/Default.aspx?fusemode=10&pid=92141
Guy is selling it cheap ($150) a little worn but will do for me unless it has some kind of weakness I haven't been able to find online.  Basically I have a 1/2" with about 450 ft/lbs but need something a lot stronger for soem of the hard to reach palces and my 1" impact is a monster and basically a mistake at this point I will sell it once I get a decent 3/4".  So any info helpful.


 I would go for it, if anything not up to par, there is nothing complicated in there(2 bearing, a drum, 4 fiber vanes, 1 hammer,1 anvil). & SK you can have parts anytime.
            wrench
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!