Bus Conversions dot Com Bulletin Board
July 27, 2014, 11:28:28 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an E-Mag Subscription: You will not have to go out in the rain, sleet, hail, or snow to retrieve it.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: Will this oil pan fit my 8v92 and is it shallow enough for my bus??  (Read 677 times)
RickB
Hero Member
*****
Offline Offline

Posts: 1047


81 MCI 9 smooth side 8V71 Allison 754




Ignore
« on: February 25, 2010, 12:20:03 PM »

Hey all,

http://cgi.ebay.com/ebaymotors/8V-71-or-8V-92-Detroit-Diesel-Oil-Pan-Pick-Up-Tube_W0QQcmdZViewItemQQhashZitem58864bef02QQitemZ380210245378QQptZBoatQ5fPartsQ5fAccessoriesQ5fGear

Wondering if this will fit my block and if it's gonna be shallow enough clearancewise.

Thanks Rick
Logged

I will drive my Detroit hard... I will drive my Detroit hard.
luvrbus
Hero Member
*****
Offline Offline

Posts: 12074




Ignore
« Reply #1 on: February 25, 2010, 12:34:12 PM »

Rick, you need to check the bolt pattern on your engine yours is at the year model where it could have 6 bolts on the side or 10 if you have the 10 bolt pattern that one will work with the pickup tube showing in the photo.If you need the 6 bolt pattern I have one I will give you  


good luck  
« Last Edit: February 25, 2010, 12:40:18 PM by luvrbus » Logged

Live each day like it was your last,one day it will be
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!