Bus Conversions dot Com Bulletin Board
April 18, 2014, 01:12:44 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an E-Mag Subscription: It takes up much less space in your bus.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: Oil capacity?  (Read 865 times)
RMC
Newbie
*
Offline Offline

Posts: 16





Ignore
« on: August 10, 2006, 01:14:47 PM »

How many gal. of oil with filter dose a 8V71 on a 1964 MCI5A hold? Dip stick is home made with full oil mark. After changing oil it seems like it blows out first gal. Don't know if the oil pan has been changed.
Logged
ChuckMC8
Sr. Member
****
Offline Offline

Posts: 288


1977 MC8 and 1993 102C3 Temple Ga #322 F&AM




Ignore
« Reply #1 on: August 10, 2006, 02:30:47 PM »

RMC, Heres the way to check, hold your oil dipstick beside the dipstick tube.....the correct level with the engine cold is 1" below the oil pan gasket (where the pan bolts to the block) make the mark on the stick there and there you go! EZ way to check for correct oil level. HTH Chuck
Logged

Far better is it to dare mighty things,to win glorious triumphs,even though they may be checkered by failure, than to rank with those poor spirits who neither enjoy nor suffer much,because they live in the gray twilight that knows neither victory nor defeat.  Theodore Roosevelt (1858-1919)
Busted Knuckle
Hero Member
*****
Offline Offline

Posts: 6447


6 Setras, 2 MCIs, and 1 Dina. Just buses ;D


WWW

Ignore
« Reply #2 on: August 10, 2006, 05:36:22 PM »

Great answer Chuck !!! I couldn't have said it better! BK Grin

Smiley Wink Cheesy It's gonna be a Blast at the "TN Fall Bus Bash" at Knuckle's check out the "TN Fall Bus Bash" Thread to see what all we got planned! Grin Shocked Roll Eyes
Logged

Busted Knuckle aka Bryce Gaston
KY Lakeside Travel's Busted Knuckle Garage
Huntingdon, TN 12 minutes N of I-40 @ exit 108
www.kylakesidetravel.net

Grin Keep SMILING it makes people wonder what yer up to! Grin (at least thats what momma always told me! Grin)
buswarrior
Hero Member
*****
Offline Offline

Posts: 3571


'75 MC8 8V71 HT740




Ignore
« Reply #3 on: August 10, 2006, 06:51:54 PM »

Recent thread over on BNO on this topic.

From there, seems between us all, MCI has either 7 US gallons or 8 US gallons for an oil change with filter, depending which manual you refer to.

try filling with 7 gallons, run it and let it drain back down for a few hours, and then using the above technique for finding the right level, dip the oil and guestimate where it might be at that time.

Since busnuts are prone to changing their oil earlier than recommended change intervals, and keeping closer watch than a commercial coach driver might on fluid levels, even if you are running 7 when you should be running 8, I doubt it will matter.  Especially when it wants to puke the first gallon in your current situation....

whatever?

happy coaching!
buswarrior
Logged

Frozen North, Greater Toronto Area
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!