Bus Conversions dot Com Bulletin Board
October 23, 2014, 12:06:25 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: This BB is intended for the sole purpose of sharing conversion and bus related information among visitors to our web site. These rules must be followed in order for us to continue this free exchange of info. No bad mouthing of any business or individual is permitted. Absolutely no items for sale are to be posted, except in the Spare Tire board. Interested in placing a classified or web ad, please contact our advertising dept. at 714-903-1784 or e-mail to: info@busconversions.com.

   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: 1 [2]  All   Go Down
  Print  
Author Topic: Where to get good corrosion resistant screws? (Not stainless)  (Read 2240 times)
pvcces
Hero Member
*****
Offline Offline

Posts: 755





Ignore
« Reply #15 on: August 24, 2010, 06:58:04 PM »

If a fastener is a different than the fastened material, you will have more corrosion problems. If they must be two different metals, then they should be near each other on the list of electronegative metals.

A good example of this happens when fastening aluminum sheets. If a mild steel fastener is used, it will corrode promptly when exposed to road salt, but stainless is near aluminum in the chart, so they work well together. Take a look at any outboard motor; most of the fasteners will be stainless.

Another metal you can check on is monel. This is often used in boats as a shaft material. I don't know if it could be used for fasteners.

Good luck.

Tom Caffrey
Logged

Tom Caffrey PD4106-2576
Suncatcher
Ketchikan, Alaska
Pages: 1 [2]  All   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!