Bus Conversions dot Com Bulletin Board
August 28, 2014, 06:03:25 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an E-Mag Subscription: You will not have to go out in the rain, sleet, hail, or snow to retrieve it.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: Detroit 6v92T set up  (Read 1048 times)
eagle10
Full Member
***
Offline Offline

Posts: 103




Ignore
« on: August 27, 2006, 05:46:11 AM »


Would I run into any issues if my 6v92T were set up from 2150 to 2300? Ideas?
Logged
DrivingMissLazy
Hero Member
*****
Offline Offline

Posts: 2634




Ignore
« Reply #1 on: August 27, 2006, 05:52:37 AM »

I run the 8V92 in my Eagle 10 at 2300 rpm for at least 100,000 miles with no problem. This was full load governed rpm. I seldom run it that fast, but did run in the 2200 rpm up a lot of grades. I do not know what the top speed was but I could bury the speedometer at 80 and still had more left.
Richard


Would I run into any issues if my 6v92T were set up from 2150 to 2300? Ideas?
Logged

Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body. But rather to skid in sideways, chocolate in one hand, a good Reisling in the other, body thoroughly used up, totally worn out and screaming:  WOO HOO, what a ride
Happycampersrus
Full Member
***
Offline Offline

Posts: 120




Ignore
« Reply #2 on: August 27, 2006, 06:38:03 AM »

It won't cause any problems. The only time you would have to worry is if you were to go much above 2500.

Dale
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!