Bus Conversions dot Com Bulletin Board
October 20, 2014, 09:06:57 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an Online Subscription: You will not have to go out in the rain, sleet, hail, or snow to retrieve it.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: 1 [2]  All   Go Down
  Print  
Author Topic: stainless tanks  (Read 2256 times)
belfert
Guest

« Reply #15 on: August 30, 2006, 06:03:44 AM »

My situation was I have a large combined waste tank (200 gal.) and a 140 fresh tank. The senders I used drop down from inside the coach so I put a small access plug that I can get to if I ever need to change or replace them. One of the problems I had with my old sender for the waste tank was junk (use your imagination) on the sender. The salesman and Wema suggested using a gauge that starts a tank which works really great. The heavy ends are at the bottom and do not hang up on the sender. I have been using it for 3 years now without problems. The fresh tank works great and is very accurate.

There are other senders that stick into the tank that don't have a float like the Wema has.  Snake River Electronics is one, but their senders probably only work with their tanks.

Brian Elfert
Logged
Pages: 1 [2]  All   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!