Bus Conversion Magazine Bulletin Board
October 24, 2016, 07:27:17 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an Online Subscription: You can zoom in to make the text larger and easier to read.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: 1 [2]  All   Go Down
Author Topic: Securing furniture and appliances to the floor ?  (Read 4530 times)

« Reply #15 on: October 23, 2010, 12:24:54 PM »

With iggles we secure the stuff to the towed.  Grin
Rick 74 MC-8
Full Member
Online Online

Posts: 249

« Reply #16 on: October 23, 2010, 12:38:51 PM »

With a bungee cords  when everything stops it gets snapped Back into place  Shocked Grin

About 20 Miles West Of Chicago
Hero Member
Offline Offline

Posts: 1813

« Reply #17 on: October 23, 2010, 12:49:16 PM »

With all the stainless steel in the RTS I guess you could secure stuff with spit  Grin Grin Grin

The Little GTO is a 102" wide and 40' long 1983 GMC RTS II and my name is Teresa in case I forgot to sign my post
Hero Member
Offline Offline

Posts: 2465

1979 MCI MC5Cs 6V-71 644MT Allison, Roseville, CA

« Reply #18 on: October 24, 2010, 11:14:03 AM »

We put most of ours in Cabinets also. Seats are bolted through floor PITA but safe w/ seat belts that came bolted to steel seat frames.

If freestanding refrigerator you might put L brackets next to sides with plates on inside at front bottom with wing nuts and bolts going through both and a steel strap at back or top side hooked to bus side as not to tip but can be taken loose to clean behind etc.

Couches can be bolted own through floor or use big flush wing nuts. Lots of big washers. At least Grade 8 bolts. FWIW


Pages: 1 [2]  All   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!