Bus Conversions dot Com Bulletin Board
September 01, 2014, 09:39:24 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: This BB is intended for the sole purpose of sharing conversion and bus related information among visitors to our web site. These rules must be followed in order for us to continue this free exchange of info. No bad mouthing of any business or individual is permitted. Absolutely no items for sale are to be posted, except in the Spare Tire board. Interested in placing a classified or web ad, please contact our advertising dept. at 714-903-1784 or e-mail to: info@busconversions.com.

   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: 1 [2]  All   Go Down
  Print  
Author Topic: stainless tanks  (Read 2203 times)
belfert
Guest

« Reply #15 on: August 30, 2006, 06:03:44 AM »

My situation was I have a large combined waste tank (200 gal.) and a 140 fresh tank. The senders I used drop down from inside the coach so I put a small access plug that I can get to if I ever need to change or replace them. One of the problems I had with my old sender for the waste tank was junk (use your imagination) on the sender. The salesman and Wema suggested using a gauge that starts a tank which works really great. The heavy ends are at the bottom and do not hang up on the sender. I have been using it for 3 years now without problems. The fresh tank works great and is very accurate.

There are other senders that stick into the tank that don't have a float like the Wema has.  Snake River Electronics is one, but their senders probably only work with their tanks.

Brian Elfert
Logged
Pages: 1 [2]  All   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!