Bus Conversions dot Com Bulletin Board
October 02, 2014, 03:32:45 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an E-Mag Subscription: You will not incur forwarding fees when you are on the road.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: 1 [2]  All   Go Down
  Print  
Author Topic: Universal electric pump for priming.  (Read 2661 times)
bevans6
Hero Member
*****
Online Online

Posts: 4677


1980 MCI MC-5C




Ignore
« Reply #15 on: November 26, 2010, 10:48:50 AM »

I think they are saying the same thing - that an in-line electric pump won't actually run the engine, but that if you select a "flow-through" in line pump, when it is off it will let the regular gear pump work properly and run the engine just fine.  The idea being that a flow through pump can be simply in-line and not have a bunch of valves.  sounds like a great idea!

Brian
Logged

1980 MCI MC-5C, 8V-71T from a M-110 self propelled howitzer
Spicer 8844 4 speed Zen meditation device
Vintage race cars -
1978 Lola T440 Formula Ford
1972 NTM MK-4 B/SR
Greg Smith
GREGOOSE
Newbie
*
Offline Offline

Posts: 26




Ignore
« Reply #16 on: November 26, 2010, 08:08:00 PM »

I own a 1976 MCI8 with an 8v71. My mechanical fuel pump quit and I installed an electric pump off the shelf. There were two types, a low pressure and a "regular" pressure. (bought at an auto parts place) I put the pump inline at the tank. It's still there, I haven't fixed the mechanical pump yet. Bus runs like a dream.

In my opinion, put an electric pump inline, hook it to a toggle switch, it's there if you ever need it.

Greg
Logged

Life may not be the party we hoped for, but while we're here, we might as well dance.
gus
Hero Member
*****
Offline Offline

Posts: 3516





Ignore
« Reply #17 on: November 26, 2010, 11:14:06 PM »

Greg,

Sounds very good.

Even better is to fix the mechanical pump and use the electric pump both as a backup and a primer  now that you know it works - peace of mind.

What size inlet and outlet tubes are on your pump and what is the brand & model?   
« Last Edit: November 26, 2010, 11:19:25 PM by gus » Logged

PD4107-152
PD4104-1274
Ash Flat, AR
luvrbus
Hero Member
*****
Offline Offline

Posts: 12595




Ignore
« Reply #18 on: November 27, 2010, 05:45:49 AM »

Guys pressure is one thing they will run on 10 lbs but the pump needs to supply 65 gph at 50 lbs and above on a 8v to keep the injectors cool,I would repair the gear driven and do as Gus recommends me I always replace the old style DD pump with the newer DDEC pump 95 gph just my way because I don't like stuck injectors plus those little filters in each injector are a pain to change and they are going to plug without the correct flow and pressure.  



good luck
« Last Edit: November 27, 2010, 06:06:33 AM by luvrbus » Logged

Life is short drink the good wine first
Pages: 1 [2]  All   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!