Bus Conversions dot Com Bulletin Board
October 24, 2014, 06:38:53 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an Online Subscription: It takes up much less space in your bus.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: Dash lights/Tail lights out  (Read 1116 times)
thejumpsuitman
Hero Member
*****
Offline Offline

Posts: 755


'79/'97 Eagle 05


WWW

Ignore
« on: February 13, 2011, 05:08:17 AM »

Good morning.  Got a little problem.  Dash lights and tail lights are out on an Eagle 05.  Any ideas?  I'm thinking ground, but have no wiring diagrams to hunt it down.  I know in a car, the tail lights are dash lights are always on the same circuit.  Thought it might be a similar thing.  Thanks.

Marc
Logged

"Life is like a game of Pool... No matter how bad it looks, you take your shot."
rv_safetyman
Hero Member
*****
Offline Offline

Posts: 2199


Jim Shepherd


WWW

Ignore
« Reply #1 on: February 13, 2011, 12:42:05 PM »

Marc, On an Eagle 10 (and I think an 05) take a look in the electric service panel beside the driver on the outside are a ton of fuses.  They make their contact at the end of the fuse.  They may have been a good idea at one time, but they can give you grief as the spring pressure drops over the years. 

Spin each one and I think that at least the dash lights will come on.  I also think the tail lights to through those fuses.

I have a sheet of all of the fuse connections on a 10 and would be happy to work with you to see if they are close to the same for an 05.

Give me a call if you need more help three zero three 478 thiry five zero one.

Jim
Logged

Jim Shepherd
Evergreen, CO
85 Eagle 10/Series 60/Eaton AutoShift 10 speed transmission
Somewhere between a tin tent and a finished product
Bus Project details: http://beltguy.com/Bus_Project/busproject.htm
Blog:  http://rvsafetyman.blogspot.com/
luvrbus
Hero Member
*****
Online Online

Posts: 12761




Ignore
« Reply #2 on: February 13, 2011, 01:35:42 PM »

Jim, no fuses in the panel all self setting breakers and relays my understanding he has 1 tail light he needs to open the doors on each side and check for power at the junction box on each side and he may have the sealed tail lights and they are bad,the dash and tail lights are on the same circuit.
If he has clearance lights he should have 2 tail lights,that bus does not have the 05 dash so who knows lol you know the converter thing.


good luck
« Last Edit: February 13, 2011, 02:06:40 PM by luvrbus » Logged

Life is short drink the good wine first
gus
Hero Member
*****
Offline Offline

Posts: 3524





Ignore
« Reply #3 on: February 14, 2011, 02:45:07 PM »

Marc,

Do you have marker lights? 

I don't know about Eagles but many buses have marker, dash and tail lights on the same circuit.
Logged

PD4107-152
PD4104-1274
Ash Flat, AR
blue_goose
Sr. Member
****
Offline Offline

Posts: 291





Ignore
« Reply #4 on: February 16, 2011, 06:21:57 AM »

On my 05 the tail lights and dash lights are on the came relay and the marker lights or on a different one.
Jack
Logged

Data used in this document is made from 100% recycled electrons and magnetic particles. No electrons were harmed in the creation of this document.
thejumpsuitman
Hero Member
*****
Offline Offline

Posts: 755


'79/'97 Eagle 05


WWW

Ignore
« Reply #5 on: February 16, 2011, 07:22:32 AM »

I do have marker lights.  Every time I have ever seen dash lights out, tail lights are out as well.  It must be a universal setup.

Actually, one tail light started working.  Still no luck with the others or the right turn signal.

This is a minor concern of course until we are back on the road.  Wink
Logged

"Life is like a game of Pool... No matter how bad it looks, you take your shot."
gus
Hero Member
*****
Offline Offline

Posts: 3524





Ignore
« Reply #6 on: February 16, 2011, 01:59:16 PM »

If one tail light works you probably have a problem at the rear since they are directly connected. Probably a bad connection at the rear electrical panel, very often just a corroded terminal or wire. Had a bunch of those in my 4104.

Again, I'm assuming Eagles have rear panels.

Turns and brakes are on a different circuit.

I'm eventually going to put my dash lights on a separate circuit, I'm pretty tired of this problem!

Again, older GMs have tail lights, dash  and markers together.
Logged

PD4107-152
PD4104-1274
Ash Flat, AR
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!