Bus Conversions dot Com Bulletin Board
September 17, 2014, 08:48:51 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an E-Mag Subscription: It will not get torn up or crushed if you back over it with your bus.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: Wheel Source  (Read 520 times)
buddydawg
Hero Member
*****
Offline Offline

Posts: 612





Ignore
« on: March 02, 2011, 09:47:19 AM »

I need a source for the following wheel:

Accuride 27834C
Hub-Piloted Dual-Mounting
Two-Piece Flange Nut
10-Hole, 11" Bolt Circle, 8.66" Bore
Special Bus Application with 1.22" Bolt Holes

I have been working with company A for a few months on the purchase of 6 of these rims.  I have been getting the runaround for far too long and I am ready to move to another vendor.  Does anyone know of a good source?
Logged

1972 GMC T6H-5308A #024

Brandon Stewart - Martinez, GA
scanzel
Hero Member
*****
Offline Offline

Posts: 514





Ignore
« Reply #1 on: March 02, 2011, 11:18:25 AM »

Have you tried Nimco Bus in New Jersey, they are a recycler of old transit buses and may have or know of where to purchase.
Logged

Steve Canzellarini
Berlin, CT
1989 Prevost XL
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!