Bus Conversions dot Com Bulletin Board
October 21, 2014, 08:11:51 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an Online Subscription: It arrives at least two weeks before the First Class printed magazine.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: Airline from compressor head? 6V92  (Read 1183 times)
grantgoold
Hero Member
*****
Offline Offline

Posts: 1048





Ignore
« on: September 13, 2006, 06:28:25 PM »

An airline broke today that leaves the top of the compressor head and 10 inches later connects to a manifold.  Is there any reason the line is only a 3/8 hose with small fittings on both ends? Would a steel line be better? What are you folks using?

6v92 MCI 9.

Thanks

Grant
Logged

Grant Goold
1984 MCI 9
Way in Over My Head!
Citrus Heights, California
Busted Knuckle
Hero Member
*****
Offline Offline

Posts: 6447


6 Setras, 2 MCIs, and 1 Dina. Just buses ;D


WWW

Ignore
« Reply #1 on: September 13, 2006, 09:27:51 PM »

An airline broke today that leaves the top of the compressor head and 10 inches later connects to a manifold.  Is there any reason the line is only a 3/8 hose with small fittings on both ends? Would a steel line be better? What are you folks using?
6v92 MCI 9.
Thanks, Grant


Grant that is not right! If we are talking about the same hose. Is it the main hose that goes from the center of the head to a pipe hooked to the "ping tank" ? If so it should be about 3/4" Braided Steel line ! Is the one you are talking about reduced down on both ends with bushings?  I'll take a look on the "8" & 102 A3 in the morning to get a better visual on what yer look'n at! BK  Grin

PS gimme a call during the day if ya got time and I'll talk to ya about it!  731-885-7460
Logged

Busted Knuckle aka Bryce Gaston
KY Lakeside Travel's Busted Knuckle Garage
Huntingdon, TN 12 minutes N of I-40 @ exit 108
www.kylakesidetravel.net

Grin Keep SMILING it makes people wonder what yer up to! Grin (at least thats what momma always told me! Grin)
Brian Diehl
Hero Member
*****
Offline Offline

Posts: 984




Ignore
« Reply #2 on: September 14, 2006, 05:58:36 AM »

Hey Grant, does the hose connect to a device that has a cylinder looking thing on it?  If so, you are dealing with one of the small hoses that the governor uses.  As BK alludes to below the main air supply hose from the compressor is braided steel and very large and generally goes about 2-3 feet before it connects to the bus at the ping tank.  The small hoses (2) on the governor are used for delivering operating pressures of the coach air supply to the governor and are not designed to carry high volumes of air.
Logged
grantgoold
Hero Member
*****
Offline Offline

Posts: 1048





Ignore
« Reply #3 on: September 14, 2006, 06:05:23 AM »

This must be the governor hose. The pipe goes to a manifold only a few inches away on the roof and then several smaller 3/8 hoses moves to a variety of spots. One in particular started this whole repair and that was the tag axle regulator. It also has a connection to this manifold. I am not talking about the large lines that move forward to the large tanks.

Thanks

Grant
Logged

Grant Goold
1984 MCI 9
Way in Over My Head!
Citrus Heights, California
Brian Diehl
Hero Member
*****
Offline Offline

Posts: 984




Ignore
« Reply #4 on: September 14, 2006, 06:10:17 AM »

Grant, You are working with the pressure supply hoses to the govenor.  No need for a large hose there.  Just have NAPA build you a replacement.
Logged
Busted Knuckle
Hero Member
*****
Offline Offline

Posts: 6447


6 Setras, 2 MCIs, and 1 Dina. Just buses ;D


WWW

Ignore
« Reply #5 on: September 14, 2006, 06:29:53 AM »

Brian you are correct! Last night my mind was drawing a blank as I was trying to "remember the set up" or in other words "I was try'n to think but nothing was happening!" lol BK Grin
Logged

Busted Knuckle aka Bryce Gaston
KY Lakeside Travel's Busted Knuckle Garage
Huntingdon, TN 12 minutes N of I-40 @ exit 108
www.kylakesidetravel.net

Grin Keep SMILING it makes people wonder what yer up to! Grin (at least thats what momma always told me! Grin)
Brian Diehl
Hero Member
*****
Offline Offline

Posts: 984




Ignore
« Reply #6 on: September 14, 2006, 06:38:14 AM »

Brian you are correct! Last night my mind was drawing a blank as I was trying to "remember the set up" or in other words "I was try'n to think but nothing was happening!" lol BK Grin

Man I hate when that happens!
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!