Bus Conversions dot Com Bulletin Board
September 21, 2014, 03:12:28 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an E-Mag Subscription: You will not incur forwarding fees when you are on the road.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: 1 [2]  All   Go Down
  Print  
Author Topic: Air Beam Leak Repair  (Read 4208 times)
Burgermeister
Guest

« Reply #15 on: April 16, 2006, 11:33:57 AM »

You'll get a better appreciation of the task if you go to Gumpydog's site and look at the pictures.  The airbeams are rectangular tubes about 6x6 or 6x8 and 36-40" long  buried in the frame structure  below the floor and inside the wheels.

It can be done - anything can if you're determined enough!  but it's alot of work.   My "California" MCI-9 had a huge amount of fine silt all over this area that served as a "sponge"  making sure the corrosion continued long after the rain was gone.  Haven't "tested" for leaks yet,  but I'll let you know if any show and what I do to address the problem.
Logged
Melbo
Hero Member
*****
Offline Offline

Posts: 1070


MC8 under construction




Ignore
« Reply #16 on: April 16, 2006, 06:06:24 PM »

Like the old expression goes

Given enough time and enough money you can fix anything

Not to say it is always worth it

Melbo
Logged

If it won't go FORCE it ---- if it breaks it needed to be replaced anyway
Albuquerque, NM   MC8 L10 Cummins ZF
Pages: 1 [2]  All   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!