Bus Conversions dot Com Bulletin Board
August 30, 2014, 11:23:09 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: This BB is intended for the sole purpose of sharing conversion and bus related information among visitors to our web site. These rules must be followed in order for us to continue this free exchange of info. No bad mouthing of any business or individual is permitted. Absolutely no items for sale are to be posted, except in the Spare Tire board. Interested in placing a classified or web ad, please contact our advertising dept. at 714-903-1784 or e-mail to: info@busconversions.com.

   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: clutch  (Read 775 times)
berrybus
Jr. Member
**
Offline Offline

Posts: 66




Ignore
« on: September 29, 2006, 06:09:47 PM »

we have a mci 9. we finely got it down of the jack stands after replacing air bags breaks radius rod bushings balljoints shocks and rebuilding steering box. it drove well and the breaks worked good. but i cant hardley get it in gear . reverse is the worst. it gets hung in gear to. it seems to change fair going down the road un less it hangs in gear.i adjusted the clutch in back so it didnt take both feet to push the pettle down .this didnt help the problem .what can i do? thanks jim.
Logged

"No man is a bus."
TomC
Hero Member
*****
Offline Offline

Posts: 6742





Ignore
« Reply #1 on: September 30, 2006, 08:37:45 AM »

Try pulling up on the clutch pedal to make sure you only have an inch of free play.  Sometimes the pedal will get lodged in a lower position causing it to have less travel that is necessary to fully release the clutch.  Good Luck, TomC
Logged

Tom & Donna Christman. '77 AMGeneral 10240B; 8V-71TATAIC V730.
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!