Bus Conversions dot Com Bulletin Board
October 25, 2014, 04:19:55 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: This BB is intended for the sole purpose of sharing conversion and bus related information among visitors to our web site. These rules must be followed in order for us to continue this free exchange of info. No bad mouthing of any business or individual is permitted. Absolutely no items for sale are to be posted, except in the Spare Tire board. Interested in placing a classified or web ad, please contact our advertising dept. at 714-903-1784 or e-mail to: info@busconversions.com.

   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: Where is lifting points for 8V71 and Trans?  (Read 984 times)
ChuckMC8
Sr. Member
****
Offline Offline

Posts: 288


1977 MC8 and 1993 102C3 Temple Ga #322 F&AM




Ignore
« on: September 30, 2006, 05:09:45 PM »

I need an experienced eye/opinion as to where to hook the chain to safely remove 8V71 and Allison together.....there is a lifting bracket at the water pump end of the engine and also one on the rear of the drivers side head.
  On the engine I removed, there were 2 lift brackets on the bellhousing, so I hooked my chain there and lifted OK. I can transfer those to the neww engine (the one I need to lift thats pictured below) I am just wondering where the chain normally attaches to lift eng/trans together. Thanks
Logged

Far better is it to dare mighty things,to win glorious triumphs,even though they may be checkered by failure, than to rank with those poor spirits who neither enjoy nor suffer much,because they live in the gray twilight that knows neither victory nor defeat.  Theodore Roosevelt (1858-1919)
Busted Knuckle
Hero Member
*****
Offline Offline

Posts: 6447


6 Setras, 2 MCIs, and 1 Dina. Just buses ;D


WWW

Ignore
« Reply #1 on: October 01, 2006, 08:01:22 AM »

Chuck,

I use a short chain on the bellhousing brackets, to the front bracket. And I use a long chain back to  the rear of the transmission  But also remember I cheat and use a dual line tow truck to do my lifting! (If I remember correctly you're using a back hoe or trac hoe, but still able to do by choking the trans chain the even tensions) FWIW! BK  Grin
Logged

Busted Knuckle aka Bryce Gaston
KY Lakeside Travel's Busted Knuckle Garage
Huntingdon, TN 12 minutes N of I-40 @ exit 108
www.kylakesidetravel.net

Grin Keep SMILING it makes people wonder what yer up to! Grin (at least thats what momma always told me! Grin)
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!