Bus Conversions dot Com Bulletin Board
August 19, 2014, 11:47:37 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an E-Mag Subscription: You can zoom in to make the text larger and easier to read.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: LED lights (poor mans0  (Read 804 times)
eagle10
Full Member
***
Offline Offline

Posts: 103




Ignore
« on: October 04, 2006, 01:21:15 PM »

I read this idea from the board somewhere a few days ago so I thought I would try it. I thought about buying new lenses for my Eagle 10 but found I would be spending over $150. I took all the lenses off and cleaned them up with emery paper. clear coated them and put bright reflective   tape on the inside of the light unit. IT really made a difference in the brightness and looks. Thanks for the idea fellow bus nut.
Logged
DrivingMissLazy
Hero Member
*****
Offline Offline

Posts: 2634




Ignore
« Reply #1 on: October 07, 2006, 04:15:09 PM »

You're more than welcome. It is absolutely amazing the difference the tape makes.
Richard

I read this idea from the board somewhere a few days ago so I thought I would try it. I thought about buying new lenses for my Eagle 10 but found I would be spending over $150. I took all the lenses off and cleaned them up with emery paper. clear coated them and put bright reflective   tape on the inside of the light unit. IT really made a difference in the brightness and looks. Thanks for the idea fellow bus nut.
Logged

Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body. But rather to skid in sideways, chocolate in one hand, a good Reisling in the other, body thoroughly used up, totally worn out and screaming:  WOO HOO, what a ride
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!