Bus Conversions dot Com Bulletin Board
May 29, 2015, 11:24:27 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an Online Subscription: You will not have to go out in the rain, sleet, hail, or snow to retrieve it.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: LED lights (poor mans0  (Read 880 times)
eagle10
Full Member
***
Offline Offline

Posts: 103




Ignore
« on: October 04, 2006, 01:21:15 PM »

I read this idea from the board somewhere a few days ago so I thought I would try it. I thought about buying new lenses for my Eagle 10 but found I would be spending over $150. I took all the lenses off and cleaned them up with emery paper. clear coated them and put bright reflective   tape on the inside of the light unit. IT really made a difference in the brightness and looks. Thanks for the idea fellow bus nut.
Logged
DrivingMissLazy
Hero Member
*****
Offline Offline

Posts: 2634




Ignore
« Reply #1 on: October 07, 2006, 04:15:09 PM »

You're more than welcome. It is absolutely amazing the difference the tape makes.
Richard

I read this idea from the board somewhere a few days ago so I thought I would try it. I thought about buying new lenses for my Eagle 10 but found I would be spending over $150. I took all the lenses off and cleaned them up with emery paper. clear coated them and put bright reflective   tape on the inside of the light unit. IT really made a difference in the brightness and looks. Thanks for the idea fellow bus nut.
Logged

Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body. But rather to skid in sideways, chocolate in one hand, a good Reisling in the other, body thoroughly used up, totally worn out and screaming:  WOO HOO, what a ride
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!