Bus Conversion Magazine Bulletin Board
February 17, 2018, 07:32:58 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an Online Subscription: It will not turn yellow, get musty, dusty, and mildewed or fade.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
Author Topic: Tag tire size  (Read 1879 times)
"The Norm"
Offline Offline

Posts: 21

« on: August 25, 2011, 04:43:04 PM »

If I am running 315-80R22.5 on my drive axle can I put 295-75R22.5 on the tag? What are the recommended sizes for tires all around? I have a set of take offs from one of my work trucks that look nearly new and I thought it might work for the tag.
Thanks !!

1989 MCI 96A3 - 8V92TA - 4spd Auto
The conversion has started.
Full Member
Offline Offline

Posts: 192

« Reply #1 on: August 25, 2011, 11:28:33 PM »

The static loaded radius for the 295/75 low pro tire is just under 19", whereas the 315/80 is just under 20", which means the suspension will be sitting 1" lower.

I'm not too sure about the details on your coach, but I'm going to guess the suspension travel should be able to compensate for that. In other words, the tag is perfectly capable of sitting an inch lower than drive.

Otherwise I see no weight issues on a 40' coach, nor is ABS an issue like on a modern coach.
Derrick Thomas
Hero Member
Offline Offline

Posts: 1197

I may be nuts, but only for buses

« Reply #2 on: August 26, 2011, 02:11:53 PM »

while this certainly would be an issue on an eagle torsion suspension, I see no problem doing this on an MCI or any other bus with "jello bags" as Clifford calls them.

Some are called, some are sent, some just got up and went.

1998 MCI 102-DL3
Series 60 11.1/Alison B500
95% converted (they're never really done, are they?)
Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!