Bus Conversions dot Com Bulletin Board
November 25, 2015, 02:33:20 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an Online Subscription: It will not get torn up or crushed if you back over it with your bus.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
Author Topic: Vanner question  (Read 510 times)
Sr. Member
Offline Offline

Posts: 321

« on: September 14, 2011, 09:01:02 PM »

I have a 60/50 Vanner in our '67 MC 5A. The headlight/taillight/marker lights are running off of the 12 Volt "lug"
on it. It has a 4 light headlight system. I think that's all I'm using the 12 Volt "lug" for. I don't have a clue how much power I'm drawing. I need, max, 30 Amps more of 12 Volt power. Should I use the "lug" or should I take the power from the 12 Volt post in the 2/12 Volt batteries in series ?

Don & Sheila
Full Member
Offline Offline

Posts: 185

« Reply #1 on: September 15, 2011, 04:22:10 AM »

If your batteries and the Vanner equalizer are all connected as MCI connected them when the bus was built you can take the 12 volts off the battery post or the Vanner.

I prefer the battery post just because of accessibility and the fact I am not adding additional load to the Vanner cable.

Jon Wehrenberg
Knoxville TN
1997 Prevost Liberty
Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!