Bus Conversions dot Com Bulletin Board
July 28, 2014, 07:47:28 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an E-Mag Subscription: It will not turn yellow, get musty, dusty, and mildewed or fade.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: broken down/montana/8v92  (Read 935 times)
1960eagle
Newbie
*
Offline Offline

Posts: 34




Ignore
« on: September 25, 2011, 09:16:55 AM »

just bought and stuck now on way back home.8v92 oil fill tube wont take oil and turbo return cant drain back.any ideas?
Logged
Lonnie time to go
Lonnie
Sr. Member
****
Offline Offline

Posts: 301

Saginaw, Michgan




Ignore
« Reply #1 on: September 25, 2011, 09:28:54 AM »

many good idea's  the guys should be on soon.


Lonnie
Logged

1976 4905
robertglines1
steam nut
Hero Member
*****
Offline Offline

Posts: 3971





Ignore
« Reply #2 on: September 25, 2011, 10:26:32 AM »

not enough info here to vague.  does your dip stick show you need oil? your turbo return is a non restricted free flow back to pan. only thing there  that can cause problem is kinked line, plugged line  or overfull oil pan giving it no place to go. more information on engine symptoms-smoke--what color--shut down?   did you let it sit 20 minutes before checking oil level stopped?
Logged

Bob@Judy  98 XLE prevost with 3 slides --Home done---last one! SW INdiana
luvrbus
Hero Member
*****
Online Online

Posts: 12086




Ignore
« Reply #3 on: September 25, 2011, 10:34:44 AM »

You need to clarify this one where is the turbo located if on the top of the blower it drains through the blower,the turbo is pressure feed if the return is stopped up it blows the seals,do you check the engine oil through the fill tube or does it have a different stick photos would be nice to help I see no reason for a fill tube to stop up unless a rag , the seal or lid from a jug of oil some how got in there a oil jug lid is just right to plug the 1 in hole but the turbo should be blowing oil out of the tube if it is tied in there 
If you are close to Miles City I have a friend there that may could help he has a 8V92 his Eagle



good luck
« Last Edit: September 25, 2011, 10:46:13 AM by luvrbus » Logged

Live each day like it was your last,one day it will be
opus
Sr. Member
****
Offline Offline

Posts: 480





Ignore
« Reply #4 on: September 25, 2011, 01:31:18 PM »

Where are you at?
Logged

1995 BB All-American - A Transformation.
1960eagle
Newbie
*
Offline Offline

Posts: 34




Ignore
« Reply #5 on: September 26, 2011, 08:07:26 AM »

ok got it fixed p.o had rag in oil fill tube.had to pull fill tube to remove.
thanks for input from all
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!