Bus Conversion Magazine Bulletin Board
December 15, 2017, 04:29:05 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an Online Subscription: The dog will not eat it.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1] 2  All   Go Down
  Print  
Author Topic: Turning Radius  (Read 2968 times)
Busnut83
Full Member
***
Offline Offline

Posts: 190




Ignore
« on: December 31, 2011, 07:50:47 PM »

98 prevost 45' entertainer coach,,, will raising the tag  axle allow me to turn tighter... my street is 22' wide with a mail box on the opposite side... I need to back in my drive but the new coach wont quite fit.... The 40 mci9 does?Huh
Logged
Lin
Hero Member
*****
Offline Offline

Posts: 5217

1965 MC-5a




Ignore
« Reply #1 on: December 31, 2011, 08:02:36 PM »

As I understand it, raising the tag will let you make a tighter turn in reverse.  I don't know if it will enough for your needs though.  This is merely what I was told.  I never had one to try.
Logged

You don't have to believe everything you think.
luvrbus
Hero Member
*****
Offline Offline

Posts: 18575




Ignore
« Reply #2 on: December 31, 2011, 08:03:39 PM »

The 339 inch wheel base limits the turning radius on a entertainer raising the tag is not going to help you fwiw it will use up the 42 ft turning radius lol forward or reverse with the overhang on the rear lol

good luck
« Last Edit: December 31, 2011, 08:06:06 PM by luvrbus » Logged

Life is short drink the good wine first
Busnut83
Full Member
***
Offline Offline

Posts: 190




Ignore
« Reply #3 on: December 31, 2011, 08:12:03 PM »

Thanks  thought I would ask before I try to reinvent  the wheel?Huh
Logged
Busnut83
Full Member
***
Offline Offline

Posts: 190




Ignore
« Reply #4 on: December 31, 2011, 08:37:12 PM »

sorry  fwiw - HuhHuh?
Logged
chev49
Hero Member
*****
Offline Offline

Posts: 763




Ignore
« Reply #5 on: January 01, 2012, 08:44:59 AM »

I think my next project will be to keep the original length and shorten the wheelbase.... Grin
Logged

If you want someone to hold your hand, join a union.
Union with Christ is the best one...
Busnut83
Full Member
***
Offline Offline

Posts: 190




Ignore
« Reply #6 on: January 01, 2012, 09:03:42 AM »

What is the wheel base and turn radious of the 83 mci 9 40' njt??? I just want to compare the difference? Thanks.
Logged
luvrbus
Hero Member
*****
Offline Offline

Posts: 18575




Ignore
« Reply #7 on: January 01, 2012, 09:20:38 AM »

Believe it not the entertainer is a lot shorter 51 feet for the MCI 9 it is the overhang and length that kills you, the turning radius is a circle at the wheels the wheel base for a MCI 9 is 285 inches strange huh remove the stop and a 9 will turn in a 45 ft radius or shorter fwiw 

good luck
« Last Edit: January 01, 2012, 09:38:18 AM by luvrbus » Logged

Life is short drink the good wine first
robertglines1
steam nut
Hero Member
*****
Offline Offline

Posts: 4353





Ignore
« Reply #8 on: January 01, 2012, 10:35:46 AM »

Never  researched the turning radius numbers.  Just know if you place your rear tags where you want to back into drive way ---edge and cut front the prevost comes around quicker than the Mci I was use to driving before.For those that have been in and out of my driveway ;the prevost is easier than the Mci 8 was to get in and out. It can test your driving abilities--. not long or steep. sharp turns, hills with steep banks and ditches.   Bob
Logged

Bob@Judy  98 XLE prevost with 3 slides --Home done---last one! SW INdiana
John316
Hero Member
*****
Offline Offline

Posts: 3537

MCI 1995 DL3, DD S60, Allison B500.




Ignore
« Reply #9 on: January 02, 2012, 07:48:41 AM »

sorry  fwiw - HuhHuh?

FWIW = For What It's Worth
Logged

Sold - MCI 1995 DL3. DD S60 with a Allison B500.
DKO
Full Member
***
Offline Offline

Posts: 173



WWW

Ignore
« Reply #10 on: January 02, 2012, 09:15:20 AM »

My 95 XL raises the tag slightly to improve the turning radius if I am moving very slowly but some places are just too tight to get in.

Can the mail box be moved? I have almost moved a few myself with out meaning too. Embarrassed

DKO
Logged

Home is where you go when there's no place else to go!
1995/96 Prevost XL Vantare
Brassman
Sr. Member
****
Offline Offline

Posts: 323




Ignore
« Reply #11 on: January 02, 2012, 10:10:31 AM »

Can the mail box be moved? I have almost moved a few myself with out meaning too. Embarrassed

lol.
Logged
birdarchitect26
Newbie
*
Offline Offline

Posts: 20





Ignore
« Reply #12 on: October 20, 2017, 06:51:43 AM »

I was searching for turning radius to build my driveway around a bus. Though this was useful, included the price of a new coach from a few years back, just for shits n giggles.

"For the redesign of its 13 J4500 and E4500 models, MCI enlisted BMW Group Designworks USA, which put together the initial renderings based on MCIs goals and scope. The result is a vehicle with improved aerodynamics, functionality, and curb appeal. From an engineering standpoint (with heavy-duty, proven powertrain options and a solid foundation), its no wonder an estimated 40 percent (or more) of all motor coaches currently in service are MCI models. Below, you get an idea just how long the MCI J4500 really is45.58 feet to be exact. Other worthwhile dimensions include a 315-inch wheelbase, 102-inch width, and a little less than 12 feet in overall height. Standard J4500s have a turning radius of 47 feet, but our model was able to perform the maneuver in 45 feet, thanks to being equipped with MCIs steerable tag axle option. The as-tested price of the Detroit Diesel-powered J4500 we got to testdrive was $640,000."

http://www.trucktrend.com/cool-trucks/1304dp-motor-boatin-2013-mci-j4500-coach/
Logged
B_K
Hero Member
*****
Offline Offline

Posts: 1069




Ignore
« Reply #13 on: October 20, 2017, 07:01:31 AM »

Quote from: robertglines1
It can test your driving abilities--. not long or steep. sharp turns, hills with steep banks and ditches.   Bob

Bob I never had a problem with your driveway in my 45' Setra's!
But then Cody used to say I could move them from one bay of the shop to the other by cranking the wheels sideways and backing up about 3 feet!
Grin  BK  Grin
Logged
akroyaleagle
Hero Member
*****
Offline Offline

Posts: 624





Ignore
« Reply #14 on: October 20, 2017, 12:31:11 PM »

MCI 40-foot 7,8,9: Outside body corner, LH & RH = 50' '7" Outside tire, LH & RH = 47' 6"

Eagle 1,5,10: Outside body corner, LH & RH = 44' 3" Outside tire, LH & RH = 41' 0"

MC-5 a,b,c: Outside body corner, LH & RH = 43' 6" Outside tire, LH & RH = 40' 6"

GM 4106 specs just slightly tighter than the MC-5s, at 42' and 38' 6" respectively.

As you can see, the turning radius of the 35' MC-5 is almost identical to the 40' Eagles.
Logged

Joe Laird
'78 Eagle
Sioux Falls, South Dakota
Pages: [1] 2  All   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!