Bus Conversions dot Com Bulletin Board
July 22, 2014, 04:30:14 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an E-Mag Subscription: It arrives at least two weeks before the First Class printed magazine.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: DynaMote inverter  (Read 2776 times)
larryh
4905A-893 P8M
Sr. Member
****
Offline Offline

Posts: 350


ready to run with the big dogs




Ignore
« on: October 25, 2006, 07:10:26 PM »

I just received a 3000 watt inverter Model AL25-160 has three cables coming out a green ground, red + and a black+ open up case black comes from B+ red from A+ is this made for two battery banks.  anybody that has a schematic I would appreciate a copy or if anybody knows anything HELP please.

Larry H
Logged

Savvy ponderable:
A cowboy's only afraid of two things:
havin' ta walk,
and the love of a good woman.
"This posting was generated using an environmentally friendly, self contained flatulence generator, therefore no fossils or neutrons were harmed in the creation of this posting.


Quartzsite,
jimg1955
Newbie
*
Offline Offline

Posts: 5




Ignore
« Reply #1 on: October 25, 2006, 07:29:38 PM »

call expert auto electric 800 426 2838
Logged
pvcces
Hero Member
*****
Offline Offline

Posts: 750





Ignore
« Reply #2 on: October 25, 2006, 09:03:59 PM »

Larry, those two ratings would suggest to me that they are for the AC and DC outputs, respectively. The first while inverting and the second while charging. I think that you might have found the battery leads if they are 3/4 to 1 inch thick. If that's the case, you still need to look for your AC connections inside of the connection box.

The good news is that there is probably an automatic transfer switch inside for seamless operation.

I didn't find anything through Google, so the information is scarce.

Good luck.

Tom Caffrey
Suncatcher
Ketchikan, Alaska
Logged

Tom Caffrey PD4106-2576
Suncatcher
Ketchikan, Alaska
larryh
4905A-893 P8M
Sr. Member
****
Offline Offline

Posts: 350


ready to run with the big dogs




Ignore
« Reply #3 on: October 26, 2006, 07:17:58 AM »

Tom I know I founf the battery cables what has me stumped is the two positive hot leads AC is standard 12 gauge wire and the remote connection is 14 gauge wire  the only thing I can logically think it charged house batts seperate from vehicle battery.

somebody must have a diagram out there

LarryH
Logged

Savvy ponderable:
A cowboy's only afraid of two things:
havin' ta walk,
and the love of a good woman.
"This posting was generated using an environmentally friendly, self contained flatulence generator, therefore no fossils or neutrons were harmed in the creation of this posting.


Quartzsite,
PrinterMark
Newbie
*
Offline Offline

Posts: 1




Ignore
« Reply #4 on: October 26, 2006, 10:17:28 AM »

Go to www.vanner.com they purchased Dynamote, email support and they should be able to help you.

Mark
Logged
larryh
4905A-893 P8M
Sr. Member
****
Offline Offline

Posts: 350


ready to run with the big dogs




Ignore
« Reply #5 on: October 26, 2006, 01:00:54 PM »

Mark thank you

I have emailed Vanner co will see if I get any response out of them.

LarryH
Logged

Savvy ponderable:
A cowboy's only afraid of two things:
havin' ta walk,
and the love of a good woman.
"This posting was generated using an environmentally friendly, self contained flatulence generator, therefore no fossils or neutrons were harmed in the creation of this posting.


Quartzsite,
Len Silva
Hero Member
*****
Offline Offline

Posts: 4083


Angle Parked in a Parallel Universe


WWW

Ignore
« Reply #6 on: October 26, 2006, 03:06:30 PM »

I found this:

Dynamote Corp.
14842 Densmore Ave. N.
Shoreline
WA 98133
Phone: (206) 365-5563
Toll-Free: (800) 426-2838
Logged


Hand Made Gifts

Ignorance is only bliss to the ignorant.
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!