Bus Conversions dot Com Bulletin Board
January 30, 2015, 10:35:20 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an Online Subscription: You will not have to go out in the rain, sleet, hail, or snow to retrieve it.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: Where to get a Clutch assem for a bus  (Read 1517 times)
MartinD
Newbie
*
Offline Offline

Posts: 5




Ignore
« on: March 22, 2012, 12:02:54 PM »

Have a friend that just picked up a 1967 PD-4107 and need everything(pressure plate, clutch, bearing, etcc)  Any ideas? Thanks
Logged
Melbo
Hero Member
*****
Offline Offline

Posts: 1085


MC8 under construction




Ignore
« Reply #1 on: March 22, 2012, 12:09:23 PM »

Call Luke --- He will have it all and over night it if necessary

Melbo

PS I don't have his number with me but do a search on this site and his name will come up with the most recent number
Logged

If it won't go FORCE it ---- if it breaks it needed to be replaced anyway
Albuquerque, NM   MC8 L10 Cummins ZF
pvcces
Hero Member
*****
Offline Offline

Posts: 767





Ignore
« Reply #2 on: March 23, 2012, 06:05:17 PM »

He can tell you all the parts that you will need for the job, as well.

I believe that you have a wet clutch, so that adds one more dimension to the job.

Tom Caffrey
Logged

Tom Caffrey PD4106-2576
Suncatcher
Ketchikan, Alaska
Dave5Cs
Hero Member
*****
Offline Offline

Posts: 1782


1979 MCI MC5Cs 6V-71 644MT Allison, Roseville, CA




Ignore
« Reply #3 on: March 23, 2012, 06:35:49 PM »

Luke 1-888-262-2434
Logged

My personal skills are fine.. itís my tolerance to idiots that needs work!....

http://s1264.photobucket.com/albums/jj493/fltmr2000/
bevans6
Hero Member
*****
Offline Offline

Posts: 4963


1980 MCI MC-5C




Ignore
« Reply #4 on: March 24, 2012, 05:53:14 AM »

Keep in mind that a clutch cover can be rebuilt, and that a complete two disc clutch (cover, pressure plate, two discs, center plate) can weigh around 100 lbs so looking local is possibly an option to save shipping charges.  In my case I bought the springs and other bits from Luke and rebuilt my clutch myself.  I also replaced both the pilot bearing, the throw out bearing and the lubrication line to the throw out bearing.

Brian

Logged

1980 MCI MC-5C, 8V-71T from a M-110 self propelled howitzer
Spicer 8844 4 speed Zen meditation device
Tatamagouche, Nova Scotia
MartinD
Newbie
*
Offline Offline

Posts: 5




Ignore
« Reply #5 on: April 17, 2012, 10:08:57 AM »

This must be a hard one to find. Luke says he is looking. Been about a month now. Are there any other sources?
Logged
TomC
Hero Member
*****
Offline Offline

Posts: 7035





Ignore
« Reply #6 on: April 17, 2012, 03:47:19 PM »

Have yours rebuilt/resurfaced. Good Luck, TomC
Logged

Tom & Donna Christman. '77 AMGeneral 10240B; 8V-71TATAIC V730.
RJ
Owner of Aesop's Tortoise
Hero Member
*****
Offline Offline

Posts: 2910





Ignore
« Reply #7 on: April 17, 2012, 08:07:56 PM »

Martin -

Try Ted Campbell at Coach Maintenance in Williams, CA.  www.coachmaintenance.com

Ted doesn't come to work until after 4 pm CA time, but does answer faxes and emails.

FWIW & HTH. . .

 Wink
Logged

RJ Long
PD4106-2784 No More
S13406 MC-5C
Fresno CA
la chiva
Newbie
*
Offline Offline

Posts: 24


4107 buffalo 67




Ignore
« Reply #8 on: April 18, 2012, 07:43:34 AM »

hey Martin

 i just pull one out of a 4905 it is brand new if you can arange transport just make me a offer
i also have the tranny . parting out that 4905 and my 4107 as a allisson 730
Logged
MartinD
Newbie
*
Offline Offline

Posts: 5




Ignore
« Reply #9 on: April 19, 2012, 08:32:25 AM »

hey Martin

 i just pull one out of a 4905 it is brand new if you can arange transport just make me a offer
i also have the tranny . parting out that 4905 and my 4107 as a allisson 730

Send you an email
Logged
MartinD
Newbie
*
Offline Offline

Posts: 5




Ignore
« Reply #10 on: April 19, 2012, 08:32:51 AM »

Martin -

Try Ted Campbell at Coach Maintenance in Williams, CA.  www.coachmaintenance.com

Ted doesn't come to work until after 4 pm CA time, but does answer faxes and emails.

FWIW & HTH. . .

 Wink



Thank ya sir Smiley
Logged
luvrbus
Hero Member
*****
Online Online

Posts: 13313




Ignore
« Reply #11 on: April 19, 2012, 04:57:14 PM »

Like Tom I think he has a wet clutch a different animal
Logged

Life is short drink the good wine first
MartinD
Newbie
*
Offline Offline

Posts: 5




Ignore
« Reply #12 on: April 20, 2012, 06:15:42 AM »

it is the wet clutch
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!