Bus Conversions dot Com Bulletin Board
October 23, 2014, 11:31:05 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: This BB is intended for the sole purpose of sharing conversion and bus related information among visitors to our web site. These rules must be followed in order for us to continue this free exchange of info. No bad mouthing of any business or individual is permitted. Absolutely no items for sale are to be posted, except in the Spare Tire board. Interested in placing a classified or web ad, please contact our advertising dept. at 714-903-1784 or e-mail to: info@busconversions.com.

   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: Ring & Pinion info  (Read 684 times)
06 Bill
Jr. Member
**
Offline Offline

Posts: 85




Ignore
« on: March 31, 2012, 04:54:37 AM »

Have a ring & pinion set 8-33 teeth.  Ratio of 4 1/8  or 4.125 slightly smaller than what fits a 4106 but still V drive.
Ring stamped 2229123. Does any one have info as to what this fits. Thanks in adv 06 Bill.
Logged
pvcces
Hero Member
*****
Offline Offline

Posts: 755





Ignore
« Reply #1 on: April 01, 2012, 07:42:31 PM »

Hi, Bill.

As far as I know, 4.125:1 is stock on PD4106, PD4107 and PD4108 coaches. 4.375:1 is stock in PD4903 and PD4905 coaches. Perhaps someone else can give you the part numbers.

Good luck.

Tom Caffrey
Logged

Tom Caffrey PD4106-2576
Suncatcher
Ketchikan, Alaska
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!