Bus Conversions dot Com Bulletin Board
July 29, 2014, 03:53:13 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an E-Mag Subscription: You will not have to go out in the rain, sleet, hail, or snow to retrieve it.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: Ring & Pinion info  (Read 632 times)
06 Bill
Jr. Member
**
Offline Offline

Posts: 84




Ignore
« on: March 31, 2012, 04:54:37 AM »

Have a ring & pinion set 8-33 teeth.  Ratio of 4 1/8  or 4.125 slightly smaller than what fits a 4106 but still V drive.
Ring stamped 2229123. Does any one have info as to what this fits. Thanks in adv 06 Bill.
Logged
pvcces
Hero Member
*****
Offline Offline

Posts: 750





Ignore
« Reply #1 on: April 01, 2012, 07:42:31 PM »

Hi, Bill.

As far as I know, 4.125:1 is stock on PD4106, PD4107 and PD4108 coaches. 4.375:1 is stock in PD4903 and PD4905 coaches. Perhaps someone else can give you the part numbers.

Good luck.

Tom Caffrey
Logged

Tom Caffrey PD4106-2576
Suncatcher
Ketchikan, Alaska
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!