Bus Conversions dot Com Bulletin Board
September 16, 2014, 08:25:49 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an E-Mag Subscription: It can be read on any computer, iPad, smart phone, or compatible device.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: Backup Camera & Monitor  (Read 1109 times)
Bill DeGroot
Newbie
*
Offline Offline

Posts: 4




Ignore
« on: November 04, 2006, 07:50:02 AM »

Prior to finishing my interior, I ran RG-6 coax and 12v power between the planned-for camera location and the monitor location, with the idea of using RCA adaptors on each end of the coax to transmit the video from the camera to the monitor. I've been trying to find inexpensive cameras and monitors that would work with this wiring. I've looked at the Jensen RCS50A, which looks like a neat little package, but it appears to need additional wiring/connections. I would appreciate any help you could provide.
Logged
TomC
Hero Member
*****
Offline Offline

Posts: 6775





Ignore
« Reply #1 on: November 04, 2006, 08:21:18 AM »

As with any of the audio visual equipment, it is always best to use their cables-will keep the resistance to a minimum.  I ran my cable after my bus was finished, but anticipated additions, since all my electrical runs down the lower exterior of the left interior wall.  It is always best to build with the possibilities of adding more toys in the future.  Good Luck, TomC
Logged

Tom & Donna Christman. '77 AMGeneral 10240B; 8V-71TATAIC V730.
Dreamscape
Guest

« Reply #2 on: November 04, 2006, 09:45:35 AM »

You can find cameras on eBay for around $100 bucks, color even. They say it can be hooked to any monitor. Go to eBay Motors, click on other vehicle parts.

Paul
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!