Bus Conversion Magazine Bulletin Board
February 19, 2018, 08:23:31 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: New ownership began September 1st 2012!  Please send any comments to info@busconversions.com
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
Author Topic: back up beeper  (Read 1194 times)
captain ron

« on: November 07, 2006, 07:24:53 AM »

My backup warning beeper has quit working. for a while it was working intermitently now not at all. I do not have a schematic. also my tail and back up lights all burnt out. any help would be apreciated
Captain Ron
1978 MCI 8  8v92 ddec and alison 740A atec
Some Assembly Required
Hero Member
Offline Offline

Posts: 4082

Slightly modified 1982 MC9


« Reply #1 on: November 07, 2006, 07:42:16 AM »

There's a thread currently going on regarding MC9 backup lights. Check the info there.

First thing I'd do is get a copy of the schematic. Email me offline if noone sends you one.

I'd check the transmission switch, since it supplies ground for the the backup lights and beeper.

As for the tail lights... that one may not be related, but again, the schematic is where you need to start with a probe.

Craig Shepard
Located in Minnesquito

http://bus.gumpydog.com - "Some Assembly Required"
Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!