Bus Conversions dot Com Bulletin Board
August 22, 2014, 08:48:34 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an E-Mag Subscription: You will not have to go out in the rain, sleet, hail, or snow to retrieve it.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: 8V71 Starter LH  (Read 1970 times)
06 Bill
Jr. Member
**
Offline Offline

Posts: 84




Ignore
« on: November 08, 2006, 06:01:51 AM »

Is the starter on a 8V71 12v Left rotation & 12v Right rotation wound in the same direction.
The part #s for a V drive & a T drive seem to be the same as far as the armatures go.
The splines are straight not spiraled as on a dedicated rotation armature.
Thanks in adv 06 Bill
Logged
busguy01
Full Member
***
Offline Offline

Posts: 163




Ignore
« Reply #1 on: November 08, 2006, 09:17:45 AM »

On auto type starters you can change rotation by clocking the brush holder to a different slot on the case.  I am fairly  sure that the same holds true on any DC starter or motor. You are changeing the relation of the brushes vs the field.
JimH
Logged

Started with nothing - still have most of it left!
1963 Eagle 01 with Detroit 60 series done (Gone-sold!)
MCI EL3 in progress. raised roof & Slides
2009 Revolution 42 Sticks and staple
Summer - Yankton, South Dakota
Winter- Port St Lucie, Florida
RTS/Daytona
Hero Member
*****
Offline Offline

Posts: 526


Pete RTS/Daytona ->'89 TMC 35' 102" 6V92TA 4:10


WWW

Ignore
« Reply #2 on: November 08, 2006, 02:22:43 PM »

But remember - the clutch on the starter gear has to ratchets in the opposite direction
Logged

If you ain't part of the solution, then you're part of the problem.
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!