Bus Conversions dot Com Bulletin Board
October 23, 2014, 06:07:48 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: 500 Members as of May 5th, 2006.  Smiley  3,499 Members as of October 21, 2012 Cheesy

   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: 8V71 Starter LH  (Read 2026 times)
06 Bill
Jr. Member
**
Offline Offline

Posts: 85




Ignore
« on: November 08, 2006, 06:01:51 AM »

Is the starter on a 8V71 12v Left rotation & 12v Right rotation wound in the same direction.
The part #s for a V drive & a T drive seem to be the same as far as the armatures go.
The splines are straight not spiraled as on a dedicated rotation armature.
Thanks in adv 06 Bill
Logged
busguy01
Full Member
***
Offline Offline

Posts: 163




Ignore
« Reply #1 on: November 08, 2006, 09:17:45 AM »

On auto type starters you can change rotation by clocking the brush holder to a different slot on the case.  I am fairly  sure that the same holds true on any DC starter or motor. You are changeing the relation of the brushes vs the field.
JimH
Logged

Started with nothing - still have most of it left!
1963 Eagle 01 with Detroit 60 series done (Gone-sold!)
MCI EL3 in progress. raised roof & Slides
2009 Revolution 42 Sticks and staple
Summer - Yankton, South Dakota
Winter- Port St Lucie, Florida
RTS/Daytona
Hero Member
*****
Offline Offline

Posts: 526


Pete RTS/Daytona ->'89 TMC 35' 102" 6V92TA 4:10


WWW

Ignore
« Reply #2 on: November 08, 2006, 02:22:43 PM »

But remember - the clutch on the starter gear has to ratchets in the opposite direction
Logged

If you ain't part of the solution, then you're part of the problem.
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!