Bus Conversions dot Com Bulletin Board
September 30, 2014, 08:56:52 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: This BB is intended for the sole purpose of sharing conversion and bus related information among visitors to our web site. These rules must be followed in order for us to continue this free exchange of info. No bad mouthing of any business or individual is permitted. Absolutely no items for sale are to be posted, except in the Spare Tire board. Interested in placing a classified or web ad, please contact our advertising dept. at 714-903-1784 or e-mail to: info@busconversions.com.

   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: What adhesive to use for Soundown composite foam?  (Read 437 times)
belfert
Hero Member
*****
Offline Offline

Posts: 5445




Ignore
« on: August 18, 2012, 11:31:23 AM »

My generator enclosure had some composite foam adhered to the inside top of the enclosure.  It came loose and partially melted on the exhaust.  I purchased some Soundown composite foam to replace it.  What is the best adhesive to adhere this to the inside top of the enclosure?
Logged

Brian Elfert - 1995 Dina Viaggio 1000 Series 60/B500 - 75% done but usable - Minneapolis, MN
jjrbus
Hero Member
*****
Offline Offline

Posts: 2313

MCI5C/N Ft Myers FL




Ignore
« Reply #1 on: August 18, 2012, 01:50:33 PM »

Mine was glued and  also held in place with large Huh washers??? for lack of a better word.  JIm
Logged

Remember, even at a Mensa convention someone is the dumbest person in the room!

http://photobucket.com/buspictures

http://photobucket.com/buspictures
belfert
Hero Member
*****
Offline Offline

Posts: 5445




Ignore
« Reply #2 on: August 18, 2012, 02:21:56 PM »

Mine was glued and  also held in place with large Huh washers??? for lack of a better word.  JIm

Probably mechanical fasteners.  The fasteners are attached to the metal with glue of some sort.  I suppose I could use those by grinding off the paint to epoxy the fasteners on.

I'm still wondering what type of adhesive to use.  Some spray adhesives would attack the foam.
Logged

Brian Elfert - 1995 Dina Viaggio 1000 Series 60/B500 - 75% done but usable - Minneapolis, MN
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!