Bus Conversions dot Com Bulletin Board
May 24, 2015, 12:04:36 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an Online Subscription: You will not have to go out in the rain, sleet, hail, or snow to retrieve it.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: Turbo boost  (Read 1271 times)
freebird
Newbie
*
Offline Offline

Posts: 7




Ignore
« on: April 20, 2006, 07:26:16 PM »

 I am a little disappointed that I didn't get any replies to my inquiry about what a normal turbo boost pressure would be on my 6V92TA (not a DDEC) and how you know when it's time to have the turbo rebuilt.
Maybe I did't phrase the question correctly.
Anyway, I talked to a tech at DD and thought I would pass on what he told me.
He said to check the turbo shaft for side or end play indicating worn bearings. Also there is a rubber boot at the outlet that can sometimes blow a hole and lose pressure.
When I took a look I found the clamp between the 2 blowers had broken allowing exhaust to escape. It didn't look bad but I noticed black soot at that point and when checked it for tightness found it had broken on the back side.
I am now looking forward to a little more HP and a cleaner engine compartment. 
Marc   Eagle 10
Logged
plyonsMC9
Global Moderator
Hero Member
*****
Offline Offline

Posts: 1160


Big Wheels Turnin'


WWW
« Reply #1 on: April 20, 2006, 10:42:18 PM »

Hi Freebird,

Thanks for passing on the rest of the story - and how this turned out.  I'm sure this will be of help to someone searching for the answer to the same question sometime in the future.  I've got a 6v92 non-ddec, so will keep this in mind as well.

Kind Regards, Phil
Logged

Northern Arizona / 1983 - MC9
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!