Bus Conversions dot Com Bulletin Board
August 22, 2014, 02:51:11 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: New ownership began September 1st 2012!  Please send any comments to info@busconversions.com
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: purge valve stays open what can i do  (Read 584 times)
glenn
Glenn & Sharon
Newbie
*
Offline Offline

Posts: 16


mci 9




Ignore
« on: November 11, 2006, 12:05:36 PM »

bus will not shut off has no pressure all the air is coming out the dryer
« Last Edit: November 11, 2006, 12:09:40 PM by Dallas » Logged
gumpy
Some Assembly Required
Hero Member
*****
Offline Offline

Posts: 3203


Slightly modified 1982 MC9


WWW

Ignore
« Reply #1 on: November 11, 2006, 12:10:28 PM »

Well, for starters, you can shut it off manually, by moving the shutdown lever on top of your engine by hand, being careful to avoid the fan belt.

Second, you either have a governor problem, or a dryer problem. My vote is governor sticking.

There was a whole thread on this recently where the purge valve was leaking, but it resulted in full pressure but cycling of the compressor in a narrow range. If you're not getting any pressure built up, I'd be more inclined to think governor, since I have experienced that very thing with the same symptoms. Tap the governor with the butt of a large screwdriver to see if it will free up.

craig
Logged

Craig Shepard
Located in Minnesquito

http://bus.gumpydog.com - "Some Assembly Required"
glenn
Glenn & Sharon
Newbie
*
Offline Offline

Posts: 16


mci 9




Ignore
« Reply #2 on: November 11, 2006, 12:35:51 PM »

got it to shut off
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!