Bus Conversions dot Com Bulletin Board
November 27, 2014, 12:49:27 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an Online Subscription: It will not get torn up or crushed if you back over it with your bus.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: MCI 7 side window removal  (Read 565 times)
edvanland
Sr. Member
****
Offline Offline

Posts: 360




Ignore
« on: October 26, 2012, 10:36:31 AM »

OK the front right side slider got broken when my flag pole snaped in a very hard wind at Lake Powell. This is an original window. I was able to get the broken one out by sort of prying it from the top. My question is how should this come out? Normally on a slider you lift it up and it will come out, not this one. Any ideas on how to get it back in without breaking it?
Thanks
ED
1973 MCI 7
Logged

Ed Van
MCI 7
Cornville, AZ
bevans6
Hero Member
*****
Online Online

Posts: 4822


1980 MCI MC-5C




Ignore
« Reply #1 on: October 26, 2012, 10:58:20 AM »

On my MCI the side windows are on hinges, you pop the emergency latch and the window swings free, then you take out two hinge pins and the window comes right out.  Maybe look for that sort of thing?

Brian
Logged

1980 MCI MC-5C, 8V-71T from a M-110 self propelled howitzer
Spicer 8844 4 speed Zen meditation device
Vintage race cars -
1978 Lola T440 Formula Ford
1972 NTM MK-4 B/SR
challenger440
Full Member
***
Offline Offline

Posts: 189


WWW

Ignore
« Reply #2 on: October 26, 2012, 11:27:39 AM »

What Brian said.  Then I'm pretty sure your going to have to take the frame apart to replace the glass.  I just looked at mine and I doubt that you can replace the glass any other way.  j
Logged

John M.
Helena, Mt
MC7  "under construction"
buswarrior
Hero Member
*****
Offline Offline

Posts: 3571


'75 MC8 8V71 HT740




Ignore
« Reply #3 on: October 26, 2012, 11:53:49 AM »

Ditto.

Remove entire assembly from the coach by pulling the hinge pins at the top.
A piece of scaffolding of the correct height makes this a lot safer job than ladders.

The frame disassembles to release the individual sliders.

happy coaching!
buswarrior

 
« Last Edit: October 26, 2012, 01:42:23 PM by buswarrior » Logged

Frozen North, Greater Toronto Area
bevans6
Hero Member
*****
Online Online

Posts: 4822


1980 MCI MC-5C




Ignore
« Reply #4 on: October 26, 2012, 01:30:43 PM »

Note that the window probably weighs close to 100 lbs, it's not light, so judge your support carefully.  As BW suggested I built a scaffold of sorts.

Brian
Logged

1980 MCI MC-5C, 8V-71T from a M-110 self propelled howitzer
Spicer 8844 4 speed Zen meditation device
Vintage race cars -
1978 Lola T440 Formula Ford
1972 NTM MK-4 B/SR
buswarrior
Hero Member
*****
Offline Offline

Posts: 3571


'75 MC8 8V71 HT740




Ignore
« Reply #5 on: October 26, 2012, 01:40:46 PM »

Here is an example of a bus-purposed scaffold courtesy of Fred Hobe.

Fourth topic down this page:

http://users.cwnet.com/thall/fredhobe5.htm

There are also commercially available scaffolds/work platforms that are similar in height at your local building supply or Home Depot for under $400.

I don't know many who have fallen off ladders and other rigged up climbing foolishness who don't wish they spent some time/cash before to prevent the permanent injury from falling.

happy coaching!
buswarrior



« Last Edit: October 26, 2012, 01:42:45 PM by buswarrior » Logged

Frozen North, Greater Toronto Area
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!