Bus Conversions dot Com Bulletin Board
July 22, 2014, 04:13:10 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: If you had an E-Mag Subscription: You will not have to go out in the rain, sleet, hail, or snow to retrieve it.
   Home   Help Forum Rules Search Calendar Login Register BCM Home Page Contact BCM  
Pages: [1]   Go Down
  Print  
Author Topic: Trace Inverter  (Read 755 times)
Frank @ TX
Full Member
***
Offline Offline

Posts: 221




Ignore
« on: November 01, 2012, 09:43:12 AM »

Hi,
I have a Trace inverter / Charger PS 2524.
The house batteries are in a slide out.
When I pulled out the drawer I broke the battery temp sensor wire.
The break ( pull ) tore the wires from the sensor.
Does anyone have one or know what is used in the sensor.
It is molded into a rubber block.
Could be a thermocouple or a thermister or some other thing.
The inverter/charger does not work very good with out it.
Any help would be good.
Thanks
Frank
Logged
pvcces
Hero Member
*****
Offline Offline

Posts: 750





Ignore
« Reply #1 on: November 04, 2012, 07:12:59 PM »

The part you are looking for is a BTS-15 or BTS-25. there is a thermister in the block. The number indicates the length of the wire. These are readily available, so there is no need to do without the correct part.

http://www.solarpanelstore.com/solar-power.xantrex-inverters.xantrex-accessories.bts-15.info.1.html

Good luck.

Tom Caffrey
Logged

Tom Caffrey PD4106-2576
Suncatcher
Ketchikan, Alaska
Frank @ TX
Full Member
***
Offline Offline

Posts: 221




Ignore
« Reply #2 on: November 05, 2012, 07:00:35 AM »

Thanks Tom,
I was not so interested in running the inverter/charger with out this device.
Frank
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!